Some CD's are not Detected in Garuda

Hello,
I have multiple branded CDs. But only few are being detected but others are not getting detected. I hope the issue with the code.

I can assure you that CD driver is working normally. Because other CD's EMERY brand) are getting detected in the same moment. But others like SONA, POWER brands are not.

Kindly help me in this.

Please edit you're post, we need your

inxi -Faz

like in template, you just delete.

All CD's are not Detected in Garuda

or

Can you be a little more specific?

2 Likes

Hi there, welcome to the community.

It is more probably the issue with the CD itself. Because if the cd driver is working for some cd, it is not its fault. It is most probably the cd that is faulty.

2 Likes

Are those CD blank or not?
Do you need to burn them?
E.g. if it is a burning problem:

2 Likes

Hey thanks for your reply. I have purchased 7 CD's, only 2 of them are opening in Garuda and remaining 5 are not. Meantime, all of the CD's are working fine in Windows systems.

Hey thanks for your reply.
No, Not Blank. All CD's are already burnt and i have purchased from an edu materials seller. I just want to copy the contents to my system. But its not getting detected.

Out of 7 CD's purchased, 2 were detected and i had completed copy paste work and the remaining 5 were not detected. I don't know where is the problem.

@SGS

Kindly check it here. Am i posted the right data as asked...

System: Kernel: 5.14.14-zen1-1-zen x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=c33907df-c388-4003-9175-d450acba36ef
rw [email protected] quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
systemd.unified_cgroup_hierarchy=1 loglevel=3
Desktop: KDE Plasma 5.23.1 tk: Qt 5.15.2 info: latte-dock wm: kwin_x11 vt: 1 dm: SDDM
Distro: Garuda Linux base: Arch Linux
Machine: Type: Portable System: Dell product: Inspiron N4010 v: A13 serial:
Mobo: Dell model: 050VP6 v: A13 serial: BIOS: Dell v: A13 date: 03/31/2011
Battery: ID-1: BAT0 charge: 0 Wh (0.0%) condition: 1.7/4.5 Wh (38.2%) volts: 7.8 min: 10.8
model: SANYO Dell type: Li-ion serial: status: Unknown
CPU: Info: Dual Core model: Intel Core i3 M 370 bits: 64 type: MT MCP arch: Nehalem family: 6
model-id: 25 (37) stepping: 5 microcode: 7 cache: L2: 3 MiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19154
Speed: 1716 MHz min/max: 933/2399 MHz Core speeds (MHz): 1: 1716 2: 1677 3: 2074 4: 2262
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel Core Processor Integrated Graphics vendor: Dell driver: i915 v: kernel
bus-ID: 00:02.0 chip-ID: 8086:0046 class-ID: 0300
Device-2: Microdia 1.3 MPixel Integrated Webcam type: USB driver: uvcvideo bus-ID: 1-1.4:4
chip-ID: 0c45:641d class-ID: 0e02
Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver: loaded: intel
unloaded: modesetting alternate: fbdev,vesa display-ID: :0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0") s-diag: 414mm (16.3")
Monitor-1: LVDS1 res: 1366x768 hz: 60 dpi: 112 size: 310x170mm (12.2x6.7") diag: 354mm (13.9")
OpenGL: renderer: Mesa DRI Intel HD Graphics (ILK) v: 2.1 Mesa 21.2.4 direct render: Yes
Audio: Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Dell driver: snd_hda_intel
v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3b56 class-ID: 0403
Sound Server-1: ALSA v: k5.14.14-zen1-1-zen running: yes
Sound Server-2: JACK v: 1.9.19 running: no
Sound Server-3: PulseAudio v: 15.0 running: no
Sound Server-4: PipeWire v: 0.3.38 running: yes
Network: Device-1: Broadcom BCM4313 802.11bgn Wireless Network Adapter
vendor: Dell Inspiron M5010 / XPS 8300 driver: wl v: kernel modules: bcma bus-ID: 03:00.0
chip-ID: 14e4:4727 class-ID: 0280
IF: wlp3s0 state: up mac:
Device-2: Qualcomm Atheros AR8152 v1.1 Fast Ethernet vendor: Dell driver: atl1c v: kernel
port: 2000 bus-ID: 04:00.0 chip-ID: 1969:2060 class-ID: 0200
IF: enp4s0 state: down mac:
Drives: Local Storage: total: 298.09 GiB used: 62.73 GiB (21.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST9320325AS size: 298.09 GiB block-size:
physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 5400 serial: rev: DEM1
scheme: MBR
Partition: ID-1: / raw-size: 298.09 GiB size: 298.09 GiB (100.00%) used: 62.73 GiB (21.0%) fs: btrfs
dev: /dev/sda1 maj-min: 8:1
ID-2: /home raw-size: 298.09 GiB size: 298.09 GiB (100.00%) used: 62.73 GiB (21.0%) fs: btrfs
dev: /dev/sda1 maj-min: 8:1
ID-3: /var/log raw-size: 298.09 GiB size: 298.09 GiB (100.00%) used: 62.73 GiB (21.0%)
fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-4: /var/tmp raw-size: 298.09 GiB size: 298.09 GiB (100.00%) used: 62.73 GiB (21.0%)
fs: btrfs dev: /dev/sda1 maj-min: 8:1
Swap: Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 2.78 GiB used: 1007 MiB (35.4%) priority: 100 dev: /dev/zram0
Sensors: System Temperatures: cpu: 52.0 C mobo: 0.0 C
Fan Speeds (RPM): cpu: 3089
Info: Processes: 240 Uptime: 16m wakeups: 1 Memory: 2.78 GiB used: 1.71 GiB (61.5%) Init: systemd
v: 249 tool: systemctl Compilers: gcc: 11.1.0 clang: 12.0.1 Packages: pacman: 1268 lib: 342
Shell: fish v: 3.3.1 default: Bash v: 5.1.8 running-in: konsole inxi: 3.3.07

You posted 2 separate replies today, yet you have still not posted your inxi -Faz output as requested. This information is crucial to helping find a solution. We do not even know the desktop you are using, or if your CD reader is internal or an external USB model.

Your thread will be temporarily locked until you provide your inxi -Faz output. You can use the edit button on your opening post to add the required information.

Our forum requires this information to be posted if you wish assistance with a technical matter. This is all spelled out in the help request template. The consequences are also spelled out if the required info is omitted, (thread locked or deleted). Please comply with the expectations of the Garuda forum if you wish to receive assistance. If you do not adhere to our forum guidlines you will need to seek assitance elsewhere.

Good luck resolving your issue.

3 Likes