Software installed from aur doesn't have permission to write in storage

[hard_x_x_x]

I installed a pacakge from AUR AUR (en) - veikk-tablet-bin but whenever I try to save the settings it shows that failed to save the settings. I think there is something I am missing with aur pacakges. Any help would be very helpful for me… I wasted an entire week in digging out the pacakges but couldn’t find any solution.

[edu4rdshl]

First, follow the forum rules, you didn’t post the required information. Second, post the logs or screenshots of the error and what are you exactly doing.

[hard_x_x_x]

System:
  Kernel: 6.5.3-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=db5ad2d3-011a-415d-b500-980cffc68a0c rw rootflags=subvol=@
    quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0
    resume=UUID=4d1e366d-81b5-4f61-89b6-9f79c56f1412 loglevel=3 ibt=off
  Desktop: GNOME v: 44.4 tk: GTK v: 3.24.38 wm: gnome-shell dm: 1: GDM
    v: 44.1 2: SDDM note: stopped Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Laptop System: ASUSTeK product: ZenBook UX325EA_UX325EA v: 1.0
    serial: <superuser required>
  Mobo: ASUSTeK model: UX325EA v: 1.0 serial: <superuser required>
    UEFI: American Megatrends LLC. v: UX325EA.317 date: 08/09/2022
Battery:
  ID-1: BAT0 charge: 51.6 Wh (89.0%) condition: 58.0/67.1 Wh (86.5%)
    volts: 15.9 min: 15.9 model: ASUSTeK UX325 type: Li-ion serial: <filter>
    status: not charging cycles: 153
CPU:
  Info: model: 11th Gen Intel Core i5-1135G7 bits: 64 type: MT MCP
    arch: Tiger Lake gen: core 11 level: v4 note: check built: 2020
    process: Intel 10nm family: 6 model-id: 0x8C (140) stepping: 1
    microcode: 0xAC
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 320 KiB desc: d-4x48 KiB; i-4x32 KiB L2: 5 MiB desc: 4x1.2 MiB L3: 8 MiB
    desc: 1x8 MiB
  Speed (MHz): avg: 660 high: 1789 min/max: 400/4200 scaling:
    driver: intel_pstate governor: powersave cores: 1: 400 2: 400 3: 400 4: 1098
    5: 400 6: 400 7: 1789 8: 400 bogomips: 38707
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics] vendor: ASUSTeK
    driver: i915 v: kernel arch: Gen-12.1 process: Intel 10nm built: 2020-21
    ports: active: eDP-1 empty: DP-1, DP-2, DP-3, DP-4, HDMI-A-1, HDMI-A-2,
    HDMI-A-3, HDMI-A-4, HDMI-A-5 bus-ID: 0000:00:02.0 chip-ID: 8086:9a49
    class-ID: 0300
  Device-2: Quanta USB2.0 HD UVC WebCam driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-6:3 chip-ID: 0408:30c0
    class-ID: fe01 serial: <filter>
  Display: wayland server: X.org v: 1.21.1.8 with: Xwayland v: 23.2.0
    compositor: gnome-shell driver: X: loaded: modesetting
    alternate: fbdev,intel,vesa dri: iris gpu: i915 display-ID: 0
  Monitor-1: eDP-1 model: Samsung 0x4158 built: 2020 res: 1920x1080 dpi: 166
    gamma: 1.2 size: 294x165mm (11.57x6.5") diag: 337mm (13.3") ratio: 16:9
    modes: 1920x1080
  API: EGL/GBM Message: No known Wayland EGL/GBM data sources.
Audio:
  Device-1: Intel Tiger Lake-LP Smart Sound Audio vendor: ASUSTeK
    driver: sof-audio-pci-intel-tgl
    alternate: snd_hda_intel,snd_sof_pci_intel_tgl bus-ID: 0000:00:1f.3
    chip-ID: 8086:a0c8 class-ID: 0401
  API: ALSA v: k6.5.3-zen1-1-zen status: kernel-api tools: N/A
  Server-1: PipeWire v: 0.3.80 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Wi-Fi 6 AX201 driver: iwlwifi v: kernel bus-ID: 0000:00:14.3
    chip-ID: 8086:a0f0 class-ID: 0280
  IF: wlo1 state: up mac: <filter>
Bluetooth:
  Device-1: Intel AX201 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-10:4 chip-ID: 8087:0026
    class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 0 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: <filter> bt-v: 5.2 lmp-v: 11
    status: discoverable: no pairing: no
RAID:
  Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd
    v: 0.6 port: N/A bus-ID: 0000:00:0e.0 chip-ID: 8086:9a0b rev: class-ID: 0104
Drives:
  Local Storage: total: 476.94 GiB used: 20.09 GiB (4.2%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix model: HFM512GD3JX013N
    size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 41000C20 temp: 36.9 C
    scheme: GPT
Partition:
  ID-1: / raw-size: 25 GiB size: 25 GiB (100.00%) used: 20.09 GiB (80.4%)
    fs: btrfs dev: /dev/nvme0n1p8 maj-min: 259:8
  ID-2: /boot/efi raw-size: 1024 MiB size: 1022 MiB (99.80%)
    used: 580 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p6 maj-min: 259:6
  ID-3: /home raw-size: 25 GiB size: 25 GiB (100.00%)
    used: 20.09 GiB (80.4%) fs: btrfs dev: /dev/nvme0n1p8 maj-min: 259:8
  ID-4: /var/log raw-size: 25 GiB size: 25 GiB (100.00%)
    used: 20.09 GiB (80.4%) fs: btrfs dev: /dev/nvme0n1p8 maj-min: 259:8
  ID-5: /var/tmp raw-size: 25 GiB size: 25 GiB (100.00%)
    used: 20.09 GiB (80.4%) fs: btrfs dev: /dev/nvme0n1p8 maj-min: 259:8
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 15.32 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 8 dev: /dev/zram0
  ID-2: swap-2 type: partition size: 9.59 GiB used: 0 KiB (0.0%)
    priority: -2 dev: /dev/nvme0n1p9 maj-min: 259:9
Sensors:
  System Temperatures: cpu: 42.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Processes: 268 Uptime: 21m wakeups: 6691 Memory: total: 16 GiB
  available: 15.32 GiB used: 2.6 GiB (17.0%) Init: systemd v: 254
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages: 1220
  pm: pacman pkgs: 1208 libs: 388 tools: pamac,paru pm: flatpak pkgs: 12
  Shell: fish v: 3.6.1 default: Bash v: 5.1.16 running-in: gnome-terminal
  inxi: 3.3.29
Garuda (2.6.16-1):
  System install date:     2023-09-16
  Last full system update: 2023-09-16
  Is partially upgraded:   Yes
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       Probably (Run as root to verify)
  Failed units:

whenever i try to save the settings by clicking on ok it shows that error.

[noop]

Is it just this one software? In which case it’s probably an issue with this software…

Have u considered using OpenTabletDriver instead?

[SGS]

plz contact:
Tech support: [email protected]
Sales support: [email protected]
(Sales support only supports the sales on veikk.com)

We do not want to support commercial products.
https://www.veikk.com/

[noop]

Your tablet is supported by OpenTabletDriver. I would sincerely recommend using it on Linux.

Here’s how I got it running on Garuda (KDE) - but make sure to first uninstall the VEIKK software!

echo "blacklist hid_uclogic" | sudo tee -a /etc/modprobe.d/blacklist.conf
sudo rmmod hid_uclogic
paru opentabletdriver (OR USE yay -S opentabletdriver)
systemctl --user daemon-reload
systemctl --user enable opentabletdriver --now

Then you can open the OpenTabletDriver GUI and your tablet should be detected, you can set up your profiles. Here’s their Wiki for more info Wiki - OpenTabletDriver

[Bro]

@hard_x_x_x

Is partially upgraded: Yes

You really, REALLY need to fix this condition which can, among other things, cause serious system stability issues.

That is a very bad state.