I connected an 8bitdo SN30 Pro 2 to my laptop wirelessly and opened up steam, after I opened up the controller settings, It didn't show up, I then installed xpad and rebooted, but it didn't work. I've tried every mode on the controller and none of them work. When I connect it with the cable , it seems to work perfectly, anyone know what's wrong?
garuda-inxi
System:
Kernel: 6.2.7-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=4099c804-740b-4c2b-be89-691b4c6c569a rw rootflags=subvol=@
rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=7a2bef2e-2051-49ea-b2c2-476cfbd79f28 loglevel=3
sdhci.debug_quirks2=4 ibt=off acpi_backlight=native
Desktop: dwm v: 6.3 vt: 1 dm: LightDM v: 1.32.0 Distro: Garuda Linux
base: Arch Linux
Machine:
Type: Laptop System: Apple product: MacBookPro9,2 v: 1.0
serial: <superuser required> Chassis: type: 10 v: Mac-6F01561E16C75D06
serial: <superuser required>
Mobo: Apple model: Mac-6F01561E16C75D06 v: MacBookPro9,2
serial: <superuser required> UEFI: Apple v: 425.0.0.0.0 date: 10/26/2021
Battery:
ID-1: BAT0 charge: 36.8 Wh (76.8%) condition: 47.9/62.9 Wh (76.2%)
volts: 12.4 min: 10.9 model: SMP bq20z451 type: Li-ion serial: N/A
status: charging cycles: 443
CPU:
Info: model: Intel Core i5-3210M bits: 64 type: MT MCP arch: Ivy Bridge
gen: core 3 level: v2 built: 2012-15 process: Intel 22nm family: 6
model-id: 0x3A (58) stepping: 9 microcode: 0x21
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 2893 min/max: 1200/3100 scaling: driver: intel_cpufreq
governor: performance cores: 1: 2893 2: 2893 3: 2893 4: 2893 bogomips: 19954
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel 3rd Gen Core processor Graphics vendor: Apple driver: i915
v: kernel arch: Gen-7 process: Intel 22nm built: 2012-13 ports:
active: HDMI-A-1 off: LVDS-1 empty: DP-1, DP-2, DP-3, HDMI-A-2, HDMI-A-3,
VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0166 class-ID: 0300
Device-2: Apple FaceTime HD Camera type: USB driver: uvcvideo
bus-ID: 1-1.1:3 chip-ID: 05ac:8509 class-ID: 0e02 serial: <filter>
Display: server: X.Org v: 21.1.7 with: Xwayland v: 22.1.8 driver: X:
loaded: intel dri: crocus gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 506x284mm (19.92x11.18")
s-diag: 580mm (22.84")
Monitor-1: HDMI-A-1 mapped: HDMI1 pos: primary model: Samsung
serial: <filter> built: 2014 res: 1920x1080 hz: 60 dpi: 70 gamma: 1.2
size: 700x390mm (27.56x15.35") diag: 801mm (31.5") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
Monitor-2: LVDS-1 mapped: LVDS1 note: disabled model: Apple 0x9cc5
built: 2009 res: 1920x1080 dpi: 114 gamma: 1.2 size: 286x179mm (11.26x7.05")
diag: 337mm (13.3") ratio: 16:10 modes: 1280x800
API: OpenGL v: 4.2 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 4000 (IVB
GT2) direct-render: Yes
Audio:
Device-1: Intel 7 Series/C216 Family High Definition Audio
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1e20
class-ID: 0403
Sound API: ALSA v: k6.2.7-zen1-1-zen running: yes
Sound Interface: sndio v: N/A running: no
Sound Server-1: JACK v: 1.9.22 running: no
Sound Server-2: PulseAudio v: 16.1 running: yes
Sound Server-3: PipeWire v: 0.3.67 running: yes
Network:
Device-1: Broadcom NetXtreme BCM57765 Gigabit Ethernet PCIe driver: tg3
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: N/A bus-ID: 01:00.0
chip-ID: 14e4:16b4 class-ID: 0200
IF: enp1s0f0 state: down mac: <filter>
Device-2: Broadcom BCM4331 802.11a/b/g/n vendor: Apple AirPort Extreme
driver: wl v: kernel modules: bcma pcie: gen: 1 speed: 2.5 GT/s lanes: 1
bus-ID: 02:00.0 chip-ID: 14e4:4331 class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
IF-ID-1: anbox0 state: down mac: <filter>
IF-ID-2: virbr0 state: down mac: <filter>
Bluetooth:
Device-1: Apple Bluetooth USB Host Controller type: USB driver: btusb v: 0.8
bus-ID: 2-1.8.1.3:9 chip-ID: 05ac:821d class-ID: fe01
Report: bt-adapter ID: hci0 rfk-id: 1 state: up address: <filter>
Drives:
Local Storage: total: 931.51 GiB used: 526.09 GiB (56.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT1000MX500SSD1
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: 033 temp: 37 C scheme: GPT
Partition:
ID-1: / raw-size: 922.99 GiB size: 922.99 GiB (100.00%)
used: 524.94 GiB (56.9%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 70.7 MiB (23.6%) fs: vfat dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 922.99 GiB size: 922.99 GiB (100.00%)
used: 524.94 GiB (56.9%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-4: /var/log raw-size: 922.99 GiB size: 922.99 GiB (100.00%)
used: 524.94 GiB (56.9%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-5: /var/tmp raw-size: 922.99 GiB size: 922.99 GiB (100.00%)
used: 524.94 GiB (56.9%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 3.73 GiB used: 3.73 GiB (100.0%)
priority: 100 dev: /dev/zram0
ID-2: swap-2 type: partition size: 8.23 GiB used: 1.08 GiB (13.2%)
priority: -2 dev: /dev/sda3 maj-min: 8:3
Sensors:
System Temperatures: cpu: 71.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 271 Uptime: 1h 3m wakeups: 41 Memory: 3.74 GiB
used: 2.09 GiB (56.0%) Init: systemd v: 253 default: multi-user
tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7 Packages: 3452 pm: dpkg
pkgs: 0 pm: pacman pkgs: 3429 libs: 678
tools: gnome-software,octopi,pamac,paru,trizen,yay pm: flatpak pkgs: 23
Shell: fish v: 3.6.0 running-in: alacritty inxi: 3.3.25
Garuda (2.6.15-1):
System install date: 2022-04-24
Last full system update: 2023-03-21 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager mkinitcpio
Windows dual boot: No/Undetected
Failed units: anbox-container-manager.service systemd-networkd-wait-online.service