Qtile Edition lag when moving floating windows

Running to some strange lag when moving floating windows. It trails behind the cursor and it takes several seconds to move to position after deselecting. In addition, it also collects other windows if i move to a different monitor too quickly. I looked over my Picom configuration, as well as nvidia-settings . I am running an unusual monitor setup.

Everything else works as intended. In addition, i tried gnome and awesome and floating windows work as intended.

System:
  Kernel: 5.15.12-zen1-1-zen x86_64 bits: 64 compiler: gcc v: 11.1.0
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=052b08b6-4b04-4770-b2cb-31b98943efb3 rw [email protected]
    quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
    systemd.unified_cgroup_hierarchy=1
    resume=UUID=dc95f6f1-c463-4373-8178-702b16ab719e loglevel=3
  Desktop: Qtile 0.19.0 wm: LG3D vt: 1 dm: GDM 41.0, SDDM
    Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: Micro-Star model: MPG X570 GAMING PLUS (MS-7C37) v: 2.0
    serial: <superuser required> UEFI-[Legacy]: American Megatrends v: A.40
    date: 09/10/2019
CPU:
  Info: model: AMD Ryzen 5 3600X bits: 64 type: MT MCP arch: Zen 2
    family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701013
  Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
    L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
    L3: 32 MiB desc: 2x16 MiB
  Speed (MHz): avg: 3783 high: 3800 min/max: N/A cores: 1: 3800 2: 3800
    3: 3600 4: 3800 5: 3800 6: 3800 7: 3800 8: 3800 9: 3800 10: 3800 11: 3800
    12: 3800 bogomips: 91207
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional,
    STIBP: always-on, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GP104 [GeForce GTX 1080] vendor: eVga.com. driver: nvidia
    v: 495.46 alternate: nouveau,nvidia_drm bus-ID: 2d:00.0 chip-ID: 10de:1b80
    class-ID: 0300
  Display: x11 server: X.Org 1.21.1.2 compositor: picom v: git-c4107
    driver: loaded: nvidia note: n/a (using device driver) - try sudo/root
    unloaded: nvidia display-ID: :0 screens: 1
  Screen-1: 0 s-res: 4480x1440 s-dpi: 95 s-size: 1198x389mm (47.2x15.3")
    s-diag: 1260mm (49.6")
  Monitor-1: HDMI-0 res: 1920x1080 dpi: 96 size: 510x290mm (20.1x11.4")
    diag: 587mm (23.1")
  Monitor-2: DP-2 res: 2560x1440 hz: 144 dpi: 109
    size: 597x336mm (23.5x13.2") diag: 685mm (27")
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: NVIDIA GP104 High Definition Audio vendor: eVga.com.
    driver: snd_hda_intel v: kernel bus-ID: 2d:00.1 chip-ID: 10de:10f0
    class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI
    driver: snd_hda_intel v: kernel bus-ID: 2f:00.4 chip-ID: 1022:1487
    class-ID: 0403
  Sound Server-1: ALSA v: k5.15.12-zen1-1-zen running: yes
  Sound Server-2: JACK v: 1.9.19 running: no
  Sound Server-3: PulseAudio v: 15.0 running: no
  Sound Server-4: PipeWire v: 0.3.42 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Micro-Star MSI X570-A PRO driver: r8169 v: kernel port: d000
    bus-ID: 27:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp39s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Bluetooth:
  Device-1: Broadcom BCM20702A0 Bluetooth 4.0 type: USB driver: btusb v: 0.8
    bus-ID: 3-6.4:4 chip-ID: 0a5c:21e8 class-ID: fe01 serial: <filter>
  Report: bt-adapter ID: hci0 rfk-id: 0 state: down
    bt-service: enabled,running rfk-block: hardware: no software: yes
    address: <filter>
Drives:
  Local Storage: total: 2.27 TiB used: 54.68 GiB (2.3%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
    model: SSD 970 EVO Plus 2TB size: 1.82 TiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 2B2QEXM7 temp: 33.9 C scheme: GPT
  ID-2: /dev/nvme1n1 maj-min: 259:5 vendor: Samsung
    model: SSD 970 EVO 500GB size: 465.76 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 2B2QEXE7 temp: 30.9 C scheme: MBR
Partition:
  ID-1: / raw-size: 431.26 GiB size: 431.26 GiB (100.00%)
    used: 54.68 GiB (12.7%) fs: btrfs dev: /dev/nvme1n1p1 maj-min: 259:6
  ID-2: /home raw-size: 431.26 GiB size: 431.26 GiB (100.00%)
    used: 54.68 GiB (12.7%) fs: btrfs dev: /dev/nvme1n1p1 maj-min: 259:6
  ID-3: /var/log raw-size: 431.26 GiB size: 431.26 GiB (100.00%)
    used: 54.68 GiB (12.7%) fs: btrfs dev: /dev/nvme1n1p1 maj-min: 259:6
  ID-4: /var/tmp raw-size: 431.26 GiB size: 431.26 GiB (100.00%)
    used: 54.68 GiB (12.7%) fs: btrfs dev: /dev/nvme1n1p1 maj-min: 259:6
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 34.5 GiB used: 0 KiB (0.0%)
    priority: -2 dev: /dev/nvme1n1p2 maj-min: 259:7
  ID-2: swap-2 type: zram size: 31.36 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
Sensors:
  System Temperatures: cpu: N/A mobo: N/A gpu: nvidia temp: 41 C
  Fan Speeds (RPM): N/A gpu: nvidia fan: 0%
Info:
  Processes: 296 Uptime: 5m wakeups: 0 Memory: 31.36 GiB
  used: 2.38 GiB (7.6%) Init: systemd v: 250 tool: systemctl Compilers:
  gcc: 11.1.0 Packages: pacman: 1438 lib: 414 Shell: fish v: 3.3.1
  default: Bash v: 5.1.12 running-in: alacritty inxi: 3.3.11

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.