Octopi won't start on non guest account

System:
Kernel: 5.15.12-zen1-1-zen x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=37536d2b-56c7-4224-bd6a-a48d164c6ef7 rw [email protected]
quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
Desktop: KDE Plasma 5.23.5 tk: Qt 5.15.2 info: latte-dock wm: kwin_x11
vt: 3 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop Mobo: MEDION model: B560H6-EM v: 1.0
serial: <superuser required> UEFI: American Megatrends v: 560H6W0X.019
date: 07/12/2021
CPU:
Info: model: 11th Gen Intel Core i5-11400 bits: 64 type: MT MCP
arch: Rocket Lake family: 6 model-id: 0xA7 (167) stepping: 1
microcode: 0x40
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 480 KiB desc: d-6x48 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
L3: 12 MiB desc: 1x12 MiB
Speed (MHz): avg: 4128 high: 4400 min/max: 800/4400 scaling:
driver: intel_pstate governor: performance cores: 1: 4241 2: 4316 3: 4167
4: 3778 5: 3959 6: 4320 7: 4400 8: 4355 9: 4034 10: 3595 11: 4040
12: 4331 bogomips: 62208
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GA106 [GeForce RTX 3060] vendor: ZOTAC driver: nvidia
v: 495.46 alternate: nouveau,nvidia_drm bus-ID: 01:00.0 chip-ID: 10de:2503
class-ID: 0300
Device-2: SHENZHEN EMEET HD Webcam eMeet C960 type: USB
driver: hid-generic,snd-usb-audio,usbhid,uvcvideo bus-ID: 1-5:5
chip-ID: 328f:2013 class-ID: 0300 serial: <filter>
Display: x11 server: X.Org 1.21.1.2 compositor: kwin_x11 driver:
loaded: nvidia unloaded: modesetting alternate: fbdev,nouveau,nv,vesa
display-ID: :2 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 90 s-size: 1084x301mm (42.7x11.9")
s-diag: 1125mm (44.3")
Monitor-1: DP-0 res: 1920x1080 dpi: 94 size: 521x293mm (20.5x11.5")
diag: 598mm (23.5")
Monitor-2: DP-2 res: 1920x1080 dpi: 90 size: 544x303mm (21.4x11.9")
diag: 623mm (24.5")
OpenGL: renderer: NVIDIA GeForce RTX 3060/PCIe/SSE2
v: 4.6.0 NVIDIA 495.46 direct render: Yes
Audio:
Device-1: Intel Tiger Lake-H HD Audio driver: snd_hda_intel v: kernel
alternate: snd_sof_pci_intel_tgl bus-ID: 00:1f.3 chip-ID: 8086:43c8
class-ID: 0403
Device-2: NVIDIA vendor: ZOTAC driver: snd_hda_intel v: kernel
bus-ID: 01:00.1 chip-ID: 10de:228e class-ID: 0403
Device-3: JMTek LLC. USB PnP Audio Device type: USB
driver: hid-generic,snd-usb-audio,usbhid bus-ID: 1-1:2 chip-ID: 0c76:161e
class-ID: 0300
Device-4: SHENZHEN EMEET HD Webcam eMeet C960 type: USB
driver: hid-generic,snd-usb-audio,usbhid,uvcvideo bus-ID: 1-5:5
chip-ID: 328f:2013 class-ID: 0300 serial: <filter>
Sound Server-1: ALSA v: k5.15.12-zen1-1-zen running: yes
Sound Server-2: JACK v: 1.9.19 running: no
Sound Server-3: PulseAudio v: 15.0 running: no
Sound Server-4: PipeWire v: 0.3.43 running: yes
Network:
Device-1: Intel Tiger Lake PCH CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 00:14.3 chip-ID: 8086:43f0 class-ID: 0280
IF: wlo1 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
driver: r8169 v: kernel port: 3000 bus-ID: 03:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8
bus-ID: 1-14:7 chip-ID: 8087:0026 class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
Drives:
Local Storage: total: 953.87 GiB used: 30.02 GiB (3.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: MZVL21T0HCLR-00B00 size: 953.87 GiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
rev: GXA7301Q temp: 37.9 C scheme: GPT
Partition:
ID-1: / raw-size: 953.57 GiB size: 953.57 GiB (100.00%)
used: 30.02 GiB (3.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 576 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 953.57 GiB size: 953.57 GiB (100.00%)
used: 30.02 GiB (3.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 953.57 GiB size: 953.57 GiB (100.00%)
used: 30.02 GiB (3.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 953.57 GiB size: 953.57 GiB (100.00%)
used: 30.02 GiB (3.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 15.5 GiB used: 7.07 GiB (45.6%)
priority: 100 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 51.0 C mobo: N/A gpu: nvidia temp: 57 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 63%
Info:
Processes: 473 Uptime: 1h 5m wakeups: 0 Memory: 15.5 GiB
used: 9.03 GiB (58.3%) Init: systemd v: 250 tool: systemctl Compilers:
gcc: 11.1.0 Packages: pacman: 1684 lib: 499 Shell: fish v: 3.3.1
default: Bash v: 5.1.16 running-in: konsole inxi: 3.3.11

So I just switched over to Garuda Linux and I'm running into two issues for some reason Octopi is working on the Guest profile, but won't run on my main admin profile.

Throws this error You must use "user/bin/octopi" to run octopi, and that's what I'm using to run it?

Another thing is for some reason my monitor audio (DP) isn't being recognized, and won't play audio

Welcome :slight_smile:

Please post as text in- and output

echo -e {$PATH\n}
pacman -Qi octopi

You mean your user profile?

whoami

Please only one problem in one topic :wink:

3 Likes