Hello.
(1/6) Creating Timeshift snapshot before upgrade...
Using system disk as snapshot device for creating snapshots in BTRFS mode
/dev/sda1 is mounted at: /run/timeshift/backup, options: rw,relatime,compress=zstd:3,ssd,space_cache,autodefrag,subvolid=5,subvol=/
E: The system partition has an unsupported subvolume layout. Only ubuntu-type layouts with @ and @home subvolumes are currently supported.
Application will exit.
Unable to run timeshift-autosnap! Please close Timeshift and try again. Script will now exit...
The information you posted doesn't tell us anything about either of your problems, please edit your post to include inxi -Faz terminal output.
For your update issue it would be good to also have some context - has the system been updated successfully before? Have you used Timeshift to perform a system restore before this started showing?
2 Likes
System: Kernel: 5.13.9-zen1-1-zen x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=11a09b47-5533-4943-81ea-96d1477e672f rw
rootflags=subvol=@ quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
systemd.unified_cgroup_hierarchy=1 loglevel=3
Desktop: KDE Plasma 5.22.4 tk: Qt 5.15.2 info: latte-dock wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux
base: Arch Linux
Machine: Type: Laptop System: Dell product: Latitude E5440 v: 00 serial: <filter> Chassis: type: 9 serial: <filter>
Mobo: Dell model: 08RCYC v: A00 serial: <filter> BIOS: Dell v: A14 date: 01/06/2016
Battery: ID-1: BAT0 charge: 37.4 Wh (100.0%) condition: 37.4/65.5 Wh (57.0%) volts: 12.8 min: 11.1
model: Samsung SDI DELL CXF6651 type: Li-ion serial: <filter> status: Full
CPU: Info: Dual Core model: Intel Core i7-4600U bits: 64 type: MT MCP arch: Haswell family: 6 model-id: 45 (69)
stepping: 1 microcode: 26 cache: L2: 4 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 21550
Speed: 2694 MHz min/max: 800/3300 MHz Core speeds (MHz): 1: 2694 2: 2774 3: 2665 4: 2694
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel Haswell-ULT Integrated Graphics vendor: Dell driver: i915 v: kernel bus-ID: 00:02.0
chip-ID: 8086:0a16 class-ID: 0300
Device-2: NVIDIA GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] vendor: Dell driver: N/A
alternate: nouveau, nvidia_drm, nvidia bus-ID: 03:00.0 chip-ID: 10de:1140 class-ID: 0302
Device-3: Microdia Laptop_Integrated_Webcam_HD type: USB driver: uvcvideo bus-ID: 1-1.6:3 chip-ID: 0c45:649d
class-ID: 0e02
Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver: loaded: intel unloaded: modesetting
alternate: fbdev,vesa display-ID: :0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0") s-diag: 414mm (16.3")
Monitor-1: eDP1 res: 1366x768 hz: 60 dpi: 112 size: 310x170mm (12.2x6.7") diag: 354mm (13.9")
OpenGL: renderer: Mesa DRI Intel HD Graphics 4400 (HSW GT2) v: 4.5 Mesa 21.1.6 compat-v: 3.0 direct render: Yes
Audio: Device-1: Intel Haswell-ULT HD Audio vendor: Dell driver: snd_hda_intel v: kernel bus-ID: 00:03.0
chip-ID: 8086:0a0c class-ID: 0403
Device-2: Intel 8 Series HD Audio vendor: Dell driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:9c20
class-ID: 0403
Sound Server-1: ALSA v: k5.13.9-zen1-1-zen running: yes
Sound Server-2: JACK v: 1.9.19 running: no
Sound Server-3: PulseAudio v: 15.0 running: no
Sound Server-4: PipeWire v: 0.3.33 running: yes
Network: Device-1: Intel Ethernet I218-LM vendor: Dell driver: N/A modules: e1000e port: f080 bus-ID: 00:19.0
chip-ID: 8086:155a class-ID: 0200
Device-2: Intel Wireless 7260 driver: iwlwifi v: kernel port: f040 bus-ID: 02:00.0 chip-ID: 8086:08b1
class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
Bluetooth: Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-1.8.2:5 chip-ID: 8087:07dc
class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 3 state: up address: <filter>
RAID: Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci v: 3.0 port: f060 bus-ID: 00:1f.2
chip-ID: 8086.282a rev: 04 class-ID: 0104
Drives: Local Storage: total: 761.98 GiB used: 130.96 GiB (17.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: TwinMOS model: SSD size: 238.47 GiB block-size: physical: 512 B logical: 512 B
speed: 6.0 Gb/s type: SSD serial: <filter> rev: 210a scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST500VT000-1DK142 size: 465.76 GiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: SDC1 scheme: MBR
ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Toshiba model: TransMemory size: 57.74 GiB block-size:
physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition: ID-1: / raw-size: 238.47 GiB size: 238.47 GiB (100.00%) used: 48.18 GiB (20.2%) fs: btrfs dev: /dev/sda1
maj-min: 8:1
ID-2: /home raw-size: 465.76 GiB size: 465.76 GiB (100.00%) used: 51.95 GiB (11.2%) fs: btrfs dev: /dev/sdb1
maj-min: 8:17
ID-3: /var/log raw-size: 238.47 GiB size: 238.47 GiB (100.00%) used: 48.18 GiB (20.2%) fs: btrfs dev: /dev/sda1
maj-min: 8:1
ID-4: /var/tmp raw-size: 238.47 GiB size: 238.47 GiB (100.00%) used: 48.18 GiB (20.2%) fs: btrfs dev: /dev/sda1
maj-min: 8:1
Swap: Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 3.74 GiB used: 1.02 GiB (27.3%) priority: 100 dev: /dev/zram0
Sensors: System Temperatures: cpu: 53.0 C mobo: 46.0 C sodimm: SODIMM C
Fan Speeds (RPM): cpu: 3501
Info: Processes: 274 Uptime: 1h 42m wakeups: 1 Memory: 3.74 GiB used: 2.91 GiB (77.7%) Init: systemd v: 249
tool: systemctl Compilers: gcc: 11.1.0 clang: 12.0.1 Packages: pacman: 1436 lib: 370 Shell: fish v: 3.3.1
running-in: konsole inxi: 3.3.06
and the system has upgraded once before + no i dont know for real
SGS
30 August 2021 08:47
5
Seems you do not use Btrfs.
As a temporary workaround, at least to be able to update your system although with the risk of skipping the autosnap, I've recently learned that you can skip the timeshift-autosnap with
sudo SKIP_AUTOSNAP=1 pacman -Syu
Maybe try updating with that no autosnap variable and see if the hooks/Timeshift update fix it.
For the audio - try:
Adding user to audio and realtime groups
Reinstalling pipewire-support
Replacing with pulseaudio-support
2 Likes
╰─λ sudo pacman -S pipewire-support
[sudo] password for radwan:
يحلّ الاعتماديّات...
يبحث عن الحزم المتضاربة...
الحزم (1) pipewire-support-1-5
:: مواصلة التثبيت؟ [Y/n] y
(1/1) يفحص المفاتيح في حلقة المفاتيح [----------------------------------------------------------------------] 100%
(1/1) يفحص سلامة الحز [----------------------------------------------------------------------] 100%
(1/1) يحمّل ملفّات الحزم [----------------------------------------------------------------------] 100%
(1/1) يفحص تعارضات الملفّات [----------------------------------------------------------------------] 100%
(1/1) يفحص مساحة القرص المتوفّرة [----------------------------------------------------------------------] 100%
:: Running pre-transaction hooks...
(1/1) Creating Timeshift snapshot before upgrade...
Using system disk as snapshot device for creating snapshots in BTRFS mode
/dev/sda1 is mounted at: /run/timeshift/backup, options: rw,relatime,compress=zstd:3,ssd,space_cache,autodefrag,subvolid=5,subvol=/
E: The system partition has an unsupported subvolume layout. Only ubuntu-type layouts with @ and @home subvolumes are currently supported.
Application will exit.
wow great
Well you'd have to run this with SKIP_AUTOSNAP=1 as well
1 Like
SGS
30 August 2021 09:17
12
Do you use right click on Speaker icon (volume control?)
what ? like right clicking the tray ico ?
@zoeruda like its in arabic : didnt find the goal
Can you post exact text of both command and output please?
خطأ:لم يتم العثور على الهدف: SKIP_AUTOSNAP=1
SKIP_AUTOSNAP=1 should go before command
4 Likes
