Latte Dock not working

Hello.

Post your terminal/konsole in- and output as text (no pictures) from:

System:
  Kernel: 5.16.16-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 11.2.0
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=29aa3365-2bc5-4be4-9e27-13fa307c81ec rw [email protected]
    quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
    loglevel=3
  Desktop: KDE Plasma v: 5.24.3 tk: Qt v: 5.15.3 info: latte-dock
    wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: Gigabyte model: H310M H 2.0 v: x.x
    serial: <superuser required> UEFI: American Megatrends v: F12
    date: 08/13/2019
CPU:
  Info: model: Intel Core i3-9100F bits: 64 type: MCP arch: Coffee Lake
    family: 6 model-id: 0x9E (158) stepping: 0xB (11) microcode: 0xEC
  Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB
    desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB
    desc: 1x6 MiB
  Speed (MHz): avg: 3956 high: 4126 min/max: 800/4200 scaling:
    driver: intel_pstate governor: performance cores: 1: 4126 2: 3482 3: 4099
    4: 4119 bogomips: 28800
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf
    mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
  Type: mds mitigation: Clear CPU buffers; SMT disabled
  Type: meltdown mitigation: PTI
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: disabled, RSB filling
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
    vendor: Micro-Star MSI driver: amdgpu v: kernel pcie: gen: 3 speed: 8 GT/s
    lanes: 16 ports: active: DP-2,HDMI-A-1 empty: DP-1,DVI-D-1,HDMI-A-2
    bus-ID: 01:00.0 chip-ID: 1002:67df class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.3 compositor: kwin_x11 driver: X:
    loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa gpu: amdgpu
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 3280x1080 s-dpi: 96 s-size: 865x285mm (34.06x11.22")
    s-diag: 911mm (35.86")
  Monitor-1: DP-2 mapped: DisplayPort-1 pos: primary,left model: ASUS VP228
    serial: <filter> built: 2020 res: 1920x1080 hz: 60 dpi: 102 gamma: 1.2
    size: 476x268mm (18.74x10.55") diag: 546mm (21.5") ratio: 16:9 modes:
    max: 1920x1080 min: 720x400
  Monitor-2: HDMI-A-1 mapped: HDMI-A-0 pos: right model-id: HIC 0x0001
    serial: <filter> built: 2011 res: 1360x768 hz: 60 dpi: 135 gamma: 0.97
    size: 256x192mm (10.08x7.56") diag: 378mm (14.9") ratio: 4:3, 5:4 modes:
    max: 1024x768 min: 640x480
  OpenGL: renderer: AMD Radeon RX 590 Series (POLARIS10 DRM 3.44.0
    5.16.16-zen1-1-zen LLVM 13.0.1)
    v: 4.6 Mesa 21.3.7 direct render: Yes
Audio:
  Device-1: Intel 200 Series PCH HD Audio vendor: Gigabyte
    driver: snd_hda_intel v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a2f0
    class-ID: 0403
  Device-2: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
    vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.1
    chip-ID: 1002:aaf0 class-ID: 0403
  Sound Server-1: ALSA v: k5.16.16-zen1-1-zen running: yes
  Sound Server-2: PulseAudio v: 15.0 running: no
  Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Gigabyte driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: d000 bus-ID: 05:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp5s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 1.35 TiB used: 96.96 GiB (7.0%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: HDWD110
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B
    speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: A8R0
    scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 vendor: SanDisk model: SSD PLUS 240GB
    size: 223.57 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 04RL scheme: GPT
  ID-3: /dev/sdc maj-min: 8:32 vendor: Western Digital
    model: WDS240G2G0A-00JH30 size: 223.57 GiB block-size: physical: 512 B
    logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 0400
    scheme: GPT
Partition:
  ID-1: / raw-size: 79.1 GiB size: 79.1 GiB (100.00%) used: 32.75 GiB (41.4%)
    fs: btrfs dev: /dev/sdc4 maj-min: 8:36
  ID-2: /boot/efi raw-size: 511.6 MiB size: 510.6 MiB (99.80%)
    used: 580 KiB (0.1%) fs: vfat dev: /dev/sdc6 maj-min: 8:38
  ID-3: /home raw-size: 79.1 GiB size: 79.1 GiB (100.00%)
    used: 32.75 GiB (41.4%) fs: btrfs dev: /dev/sdc4 maj-min: 8:36
  ID-4: /var/log raw-size: 79.1 GiB size: 79.1 GiB (100.00%)
    used: 32.75 GiB (41.4%) fs: btrfs dev: /dev/sdc4 maj-min: 8:36
  ID-5: /var/tmp raw-size: 79.1 GiB size: 79.1 GiB (100.00%)
    used: 32.75 GiB (41.4%) fs: btrfs dev: /dev/sdc4 maj-min: 8:36
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 15.57 GiB used: 1024 KiB (0.0%)
    priority: 100 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 27.8 C mobo: 16.8 C gpu: amdgpu temp: 47.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 1091
Info:
  Processes: 294 Uptime: 5m wakeups: 0 Memory: 15.57 GiB
  used: 2.44 GiB (15.7%) Init: systemd v: 250 tool: systemctl Compilers:
  gcc: 11.2.0 Packages: note: see --pkg apt: 0 pacman: 1699 lib: 488 pkg: 0
  flatpak: 0 Shell: fish v: 3.3.1 default: Bash v: 5.1.16 running-in: konsole
  inxi: 3.3.14
Garuda (2.5.6-2):
  System install date:     2022-03-27
  Last full system update: 2022-03-30
  Is partially upgraded:   No
  Relevant software:       NetworkManager
  Windows dual boot:       Probably (Run as root to verify)
  Snapshots:               Snapper
  Failed units:            bluetooth-autoconnect.service 

hello, when I turned on my computer today, I saw that the terminal has been updated. I think the update has come. After restarting my computer, the latte dock was not working. When I tried to open it from the terminal, I was getting the already open error. Could the error have something to do with the update?

1 Like

Hi there, welcome.
What do you mean with this?

For this:

Have you tried resetting latte config to default values with the Garuda Assistant?

2 Likes

When I opened the terminal bash was running instead of fish and the tabs menu came up. I thought my settings might have been reset or the update might have arrived.

I am now trying the solution you suggested.

yeah its worked!
Thank you so much i love Garuda.

2 Likes

An update never touches the user configurations stored in the home folder.
As you'll see, you will be able to reset many other configurations from Garuda Assistant if necessary.

5 Likes

I mark it solved the #412* area question.

*Before you open a new help request, read relevant sections of the Arch and Garuda wiki.
Thoroughly search your issue and any error messages in the forum and on the web.

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.