Images not loading in Vivaldi or any of my other browsers

dablues72 · 1 November 2023 20:19

Kernel: 6.5.9-zen2-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=013a0e6f-1e15-4ec6-8862-4c62cb69ca18 rw rootflags=subvol=@
quiet rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
ibt=off
Desktop: KDE Plasma v: 5.27.9 tk: Qt v: 5.15.11 info: latte-dock
wm: kwin_x11 vt: 2 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: ROG STRIX B550-F GAMING (WI-FI) v: Rev X.0x
serial: <superuser required> UEFI: American Megatrends v: 3202
date: 06/15/2023
CPU:
Info: model: AMD Ryzen 5 5600G with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3 gen: 4 level: v3 note: check built: 2021-22
process: TSMC n7 (7nm) family: 0x19 (25) model-id: 0x50 (80) stepping: 0
microcode: 0xA50000D
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 1876 high: 4244 min/max: 400/4464 scaling:
driver: amd-pstate-epp governor: performance cores: 1: 3725 2: 4011 3: 400
4: 3716 5: 400 6: 400 7: 400 8: 4018 9: 4244 10: 400 11: 400 12: 400
bogomips: 93422
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
driver: amdgpu v: kernel arch: GCN-4 code: Arctic Islands process: GF 14nm
built: 2016-20 pcie: gen: 3 speed: 8 GT/s lanes: 8 link-max: lanes: 16
ports: active: HDMI-A-1 empty: DP-1,DP-2,DP-3 bus-ID: 01:00.0
chip-ID: 1002:67df class-ID: 0300 temp: 58.0 C
Device-2: Logitech Webcam C270 driver: snd-usb-audio,uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-2:2 chip-ID: 046d:0825
class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 21.1.9 with: Xwayland v: 23.2.2
compositor: kwin_x11 driver: X: loaded: amdgpu unloaded: modesetting
alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: SCEI MONITOR serial: <filter>
built: 2011 res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2
size: 522x294mm (20.55x11.57") diag: 600mm (23.6") ratio: 16:9 modes:
max: 1920x1080 min: 640x480
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast surfaceless: drv: radeonsi x11: drv: radeonsi
inactive: gbm,wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 23.2.1-arch1.2
glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 480 Graphics
(polaris10 LLVM 16.0.6 DRM 3.54 6.5.9-zen2-1-zen) device-ID: 1002:67df
memory: 7.81 GiB unified: no
API: Vulkan v: 1.3.269 layers: 13 device: 0 type: discrete-gpu name: AMD
Radeon RX 480 Graphics (RADV POLARIS10) driver: mesa radv
v: 23.2.1-arch1.2 device-ID: 1002:67df surfaces: xcb,xlib device: 1
type: cpu name: llvmpipe (LLVM 16.0.6 256 bits) driver: mesa llvmpipe
v: 23.2.1-arch1.2 (LLVM 16.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
Device-1: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 8
link-max: lanes: 16 bus-ID: 01:00.1 chip-ID: 1002:aaf0 class-ID: 0403
Device-2: AMD Renoir Radeon High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 07:00.1 chip-ID: 1002:1637
class-ID: 0403
Device-3: AMD Family 17h/19h HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 07:00.6 chip-ID: 1022:15e3
class-ID: 0403
Device-4: Logitech [G533 Wireless Headset Dongle]
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 1.1 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 1-7.1:7 chip-ID: 046d:0a66 class-ID: 0300
Device-5: Logitech Webcam C270 driver: snd-usb-audio,uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-2:2 chip-ID: 046d:0825
class-ID: 0102 serial: <filter>
API: ALSA v: k6.5.9-zen2-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 0.3.83 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp5s0 state: up mac: <filter>
Device-2: Intel Ethernet I225-V vendor: ASUSTeK driver: igc v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: N/A bus-ID: 06:00.0
chip-ID: 8086:15f3 class-ID: 0200
IF: enp6s0 state: down mac: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-5:9 chip-ID: 8087:0029
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 2 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: <filter> bt-v: 5.2 lmp-v: 11
status: discoverable: no pairing: no
Drives:
Local Storage: total: 1.36 TiB used: 391.42 GiB (28.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT1000MX500SSD1
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 043 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Crucial model: CT500MX500SSD1
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 023 scheme: GPT
Partition:
ID-1: / raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 391.42 GiB (84.1%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 1.2 MiB (0.4%) fs: vfat dev: /dev/sdb1 maj-min: 8:17
ID-3: /home raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 391.42 GiB (84.1%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
ID-4: /var/log raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 391.42 GiB (84.1%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
ID-5: /var/tmp raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 391.42 GiB (84.1%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 15.41 GiB used: 9.5 MiB (0.1%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 12 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 43.1 C mobo: N/A gpu: amdgpu temp: 58.0 C
Fan Speeds (rpm): N/A gpu: amdgpu fan: 729
Info:
Processes: 338 Uptime: 17m wakeups: 0 Memory: total: 16 GiB note: est.
available: 15.41 GiB used: 4.11 GiB (26.7%) Init: systemd v: 254
default: graphical tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6
Packages: 2127 pm: pacman pkgs: 2124 libs: 578 tools: octopi,pamac,paru,yay
pm: snap pkgs: 3 Shell: fish v: 3.6.1 default: Bash v: 5.2.15
running-in: konsole inxi: 3.3.30
Garuda (2.6.17-1):
System install date:     2023-11-01
Last full system update: 2023-11-01
Is partially upgraded:   No
Relevant software:       snapper NetworkManager mkinitcpio
Windows dual boot:       No/Undetected
Failed units:

I have searched the web thinking it might not be a Gurada problem, which it may not be, but I am at my wits end trying to figure this out. Any help would be greatly appreciated!

BluishHumility · 1 November 2023 20:34

This may or may not be related to your issue, but:

It looks like you just installed this system today, but you are using mkinitcpio. Did you manually switch from dracut to mkinitcpio, or are you using an old ISO?

Regarding the issue with images loading in the browser, can you be more specific? Do you notice the issue on certain sites, for example? Perhaps you can upload a screenshot to the thread so we can take a look.

dablues72 · 1 November 2023 20:45

Probably the reason it looks like I installed it today is because I’ve been messing around with the snapshots to try to fix the problem. I have 2 ssds one with windows, and one with Garuda. The same site works on the windows side of it which I only use when I have to. I appreciate the prompt reply!

BluishHumility · 1 November 2023 21:00

I don’t think there is anything wrong with your browser; I just went to this URL (Skinned Williams Defender Conversion Replacement CPO Control Deck for — DIY Retro Arcade) and discovered there is no image on the page.

dablues72 · 1 November 2023 21:19

I just tried it on vivaldi on the windows drive and it worked. It is strange. I can’t say it’s vivaldi because I’v tried it on Chrome and others and the same thing. It’s a puzzle I guess, but it is getting kind of annoying but I appreciate any help I can get.

BluishHumility · 1 November 2023 22:08

I’m not sure, but it seems like it might be an issue with that webpage (as opposed to an issue with the browser). The browser I tested in does not have an issue displaying images.

dablues72 · 1 November 2023 23:45

Thanks! I just thought maybe the webpage can detect if I’m on windows or not, which would be pretty lame.

BluishHumility · 1 November 2023 23:58

Typically your browser reports a lot more information than that, actually.

Take a look for yourself:

system · 3 November 2023 23:59

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.