╰─λ garuda-inxi
System:
Kernel: 6.13.5-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=ba34f8e5-ceda-4047-86af-c0a29d4eb4a7 rw rootflags=subvol=@
quiet loglevel=3 ibt=off
Desktop: KDE Plasma v: 6.3.2 tk: Qt v: N/A info: frameworks v: 6.11.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Laptop System: Acer product: Nitro AN515-58 v: V2.10
serial: <superuser required>
Mobo: ADL model: Jimny_ADH v: V2.10 serial: <superuser required>
part-nu: 0000000000000000 uuid: <superuser required> UEFI: Insyde v: 2.10
date: 07/07/2023
Battery:
ID-1: BAT1 charge: 54.2 Wh (100.0%) condition: 54.2/57.5 Wh (94.3%)
volts: 17.2 min: 15.4 model: LGC AP21D8M type: Li-ion serial: <filter>
status: full
CPU:
Info: model: 12th Gen Intel Core i7-12650H bits: 64 type: MST AMCP
arch: Alder Lake gen: core 12 level: v3 note: check built: 2021+
process: Intel 7 (10nm ESF) family: 6 model-id: 0x9A (154) stepping: 3
microcode: 0x436
Topology: cpus: 1x dies: 1 clusters: 7 cores: 10 threads: 16 mt: 6 tpc: 2
st: 4 smt: enabled cache: L1: 864 KiB desc: d-4x32 KiB, 6x48 KiB; i-6x32
KiB, 4x64 KiB L2: 9.5 MiB desc: 6x1.2 MiB, 1x2 MiB L3: 24 MiB
desc: 1x24 MiB
Speed (MHz): avg: 1011 min/max: 400/4600:4700:3500 scaling:
driver: intel_pstate governor: powersave cores: 1: 1011 2: 1011 3: 1011
4: 1011 5: 1011 6: 1011 7: 1011 8: 1011 9: 1011 10: 1011 11: 1011 12: 1011
13: 1011 14: 1011 15: 1011 16: 1011 bogomips: 86016
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel Alder Lake-P GT1 [UHD Graphics]
vendor: Acer Incorporated ALI driver: i915 v: kernel alternate: xe arch: Xe
process: Intel 10nm built: 2020-21 ports: active: eDP-1 empty: DP-1,DP-2
bus-ID: 0000:00:02.0 chip-ID: 8086:46a3 class-ID: 0300
Device-2: NVIDIA AD107M [GeForce RTX 4050 Max-Q / Mobile]
vendor: Acer Incorporated ALI driver: nouveau v: kernel
non-free: 550/565.xx+ status: current (as of 2025-01) arch: Lovelace
code: AD1xx process: TSMC n4 (5nm) built: 2022+ ports: active: none
empty: DP-3,HDMI-A-1,eDP-2 bus-ID: 0000:01:00.0 chip-ID: 10de:28a1
class-ID: 0300
Device-3: Chicony ACER HD User Facing driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-6:3 chip-ID: 04f2:b76f
class-ID: fe01 serial: <filter>
Display: wayland server: X.org v: 1.21.1.16 with: Xwayland v: 24.1.6
compositor: kwin_wayland driver: X: loaded: modesetting,nouveau
alternate: fbdev,intel,nv,vesa dri: iris,nouveau gpu: i915 display-ID: 0
Monitor-1: eDP-1 model: ChiMei InnoLux 0x1521 built: 2020 res:
mode: 1920x1080 hz: 144 scale: 100% (1) dpi: 142 gamma: 1.2
size: 344x193mm (13.54x7.6") diag: 394mm (15.5") ratio: 16:9
modes: 1920x1080
API: EGL v: 1.5 hw: drv: intel iris drv: nvidia nouveau platforms:
device: 0 drv: nouveau device: 1 drv: iris device: 2 drv: swrast gbm:
drv: nouveau surfaceless: drv: nouveau wayland: drv: iris x11: drv: iris
API: OpenGL v: 4.6 compat-v: 4.3 vendor: intel mesa v: 24.3.4-arch1.1
glx-v: 1.4 direct-render: yes renderer: Mesa Intel Graphics (ADL GT2)
device-ID: 8086:46a3 memory: 7.47 GiB unified: yes display-ID: :1.0
API: Vulkan v: 1.4.304 layers: 8 device: 0 type: integrated-gpu name: Intel
Graphics (ADL GT2) driver: N/A device-ID: 8086:46a3
surfaces: xcb,xlib,wayland device: 1 type: cpu name: llvmpipe (LLVM
19.1.7 256 bits) driver: N/A device-ID: 10005:0000
surfaces: xcb,xlib,wayland
Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor gpu: corectrl wl: wayland-info
x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: Intel Alder Lake PCH-P High Definition Audio
vendor: Acer Incorporated ALI driver: sof-audio-pci-intel-tgl
alternate: snd_hda_intel, snd_soc_avs, snd_sof_pci_intel_tgl
bus-ID: 0000:00:1f.3 chip-ID: 8086:51c8 class-ID: 0401
Device-2: NVIDIA AD107 High Definition Audio vendor: Acer Incorporated ALI
driver: snd_hda_intel v: kernel bus-ID: 0000:01:00.1 chip-ID: 10de:22be
class-ID: 0403
API: ALSA v: k6.13.5-zen1-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 1.2.7 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Alder Lake-P PCH CNVi WiFi vendor: Rivet Networks Dual Band
Wi-Fi 6 Killer AX1650i 160MHz 2x2 driver: iwlwifi v: kernel
bus-ID: 0000:00:14.3 chip-ID: 8086:51f0 class-ID: 0280
IF: wlp0s20f3 state: up mac: <filter>
Device-2: Realtek Killer E2600 GbE vendor: Acer Incorporated ALI
driver: r8169 v: kernel port: 3000 bus-ID: 0000:2b:00.0 chip-ID: 10ec:2600
class-ID: 0200
IF: enp43s0 state: down mac: <filter>
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: Intel AX201 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-10:4 chip-ID: 8087:0026
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 5.2
lmp-v: 11 status: discoverable: no pairing: no class-ID: 6c010c
RAID:
Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd
v: 0.6 port: N/A bus-ID: 0000:00:0e.0 chip-ID: 8086:467f rev: class-ID: 0104
Drives:
Local Storage: total: 1.9 TiB used: 7.48 GiB (0.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: MZVL21T0HCLR-00B07 size: 953.87 GiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: GXA7402Q temp: 41.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:4 vendor: Western Digital
model: WD BLACK SN770 1TB size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 731100WD temp: 44.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: PNY model: USB 3.2.1 FD
size: 57.77 GiB block-size: physical: 512 B logical: 512 B type: USB
rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: N/A serial: <filter>
fw-rev: PMAP scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
used: 7.48 GiB (0.8%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:6
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 608 KiB (0.2%) fs: vfat dev: /dev/nvme1n1p1 maj-min: 259:5
ID-3: /home raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
used: 7.48 GiB (0.8%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:6
ID-4: /var/log raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
used: 7.48 GiB (0.8%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:6
ID-5: /var/tmp raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
used: 7.48 GiB (0.8%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:6
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 15.3 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 max-streams: 16
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 42.0 C mobo: N/A
Fan Speeds (rpm): cpu: 6250 mobo: 6666
Info:
Memory: total: 16 GiB note: est. available: 15.31 GiB used: 3.92 GiB (25.6%)
Processes: 390 Power: uptime: 3m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 6.11 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 257 default: graphical
tool: systemctl
Packages: pm: pacman pkgs: 1725 libs: 523 tools: octopi,paru Compilers:
clang: 19.1.7 gcc: 14.2.1 Shell: garuda-inxi default: fish v: 4.0.0
running-in: konsole inxi: 3.3.37
Garuda (2.7.2-1):
System install date: 2025-06-18
Last full system update: 2025-06-18
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: Probably (Run as root to verify)
Failed units:
im unsure of how to get nvidia on here
good…
Now make a system update.
This happens automatically if you install additional ones or if you don’t install anything else.
If you have closed this gui.
Open konsole: command garuda-update -a …that takes a while → reboot → and sorry once again garuda-inxi.
this comes after the system update.
For this gpu you need the nvidia-open-dkms + 32 bit
sudo pacman -S nvidia-open-dkms egl-wayland lib32-nvidia-utils lib32-opencl-nvidia nvidia-settings opencl-nvidia nvidia-utils (pls with all opt. dependence)
And perhaps nvidia-prime to use the dgpu (nvidia) for games or deactivate your igpu ( intel) inside bios, but result higher energy consumption.
2 Likes
how do i go about installig nvidia-open-dkms
edit: i figured it out with chatgpt
open konsole:
sudo pacman -S nvidia-open-dkms egl-wayland lib32-nvidia-utils lib32-opencl-nvidia nvidia-settings opencl-nvidia nvidia-utils
but before pls make system update.
Not so a good idea… here you stay on a arch based distro ..use your preferred search engine or ask here inside forum and sorry, you have a little bit to learn. Use the Arch wiki in addition
example: Nvidia
2 Likes
it gives an error with nvidia-smi
NVIDIA-SMI has failed because it couldn’t communicate with the NVIDIA driver. Make sure that the latest NVIDIA
driver is installed and running.
I don´t know what you have done, sorry
I see no new garuda-inxi with the current kernel. (only example)
Think on it, after each install from relevant system stuff (kernel,driver, etc) reboot.
Without, the system can´t use this.
- If you have M$ installed then pls make a bios update.
https://www.acer.com/us-en/support/product-support/Nitro_AN515-58/downloads?suggest=AN515-58;0
Think on right settings after bios update + fastboot off inside M$ and never a warm boot
M$ to Linux. Reverse yes.
1 Like
Possibly because nvidia-prime is missing (which you need for your hybrid graphics system). Install the package with:
sudo pacman -S nvidia-prime
and reboot afterwards. Then check again with:
nvidia-smi
1 Like
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.