How can I change back/forward touchpad gestures to 2 fingers instead of 3?

Firefox gesture uses 2 fingers to swip to left or righrt, but FireDragon uses 3 which collides with KDE virtual desktop switching.

Tried looking for solutions on this forum and repo, but no luck.

Pasted inxi, could not find any settings related to it. I even compared browser.gesture values in both Firefox and FireDragon, and these all look the same.

System:
Kernel: 6.8.7-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=c17c6067-4589-42c7-8a38-17b8dc4523a1 rw rootflags=subvol=@
quiet rd.luks.uuid=5803f3bc-a82d-4509-862a-38b38f45ade8
rd.luks.uuid=f7e8111b-885e-43b9-b3e0-ce114a23f4c2
resume=/dev/mapper/luks-f7e8111b-885e-43b9-b3e0-ce114a23f4c2 loglevel=3
ibt=off
Desktop: KDE Plasma v: 6.0.4 tk: Qt v: N/A info: frameworks v: 6.1.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Laptop System: LENOVO product: 21K7CTO1WW v: ThinkPad T16 Gen 2
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: LENOVO model: 21K7CTO1WW serial: <superuser required>
part-nu: LENOVO_MT_21K7_BU_Think_FM_ThinkPad T16 Gen 2
uuid: <superuser required> UEFI: LENOVO v: R2FET38W (1.18 )
date: 01/15/2024
Battery:
ID-1: BAT0 charge: 65.6 Wh (74.2%) condition: 88.4/86.0 Wh (102.8%)
power: 9.8 W volts: 16.0 min: 15.4 model: SMP 5B10W51871 type: Li-poly
serial: <filter> status: discharging cycles: 7
CPU:
Info: model: AMD Ryzen 7 PRO 7840U w/ Radeon 780M Graphics bits: 64
type: MT MCP arch: Zen 4 gen: 5 level: v4 note: check built: 2022+
process: TSMC n5 (5nm) family: 0x19 (25) model-id: 0x74 (116) stepping: 1
microcode: 0xA704103
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 8 MiB desc: 8x1024 KiB
L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 654 high: 1459
min/max: 400/5289:5132:5605:6076:5760:5918:5447 scaling:
driver: amd-pstate-epp governor: powersave cores: 1: 400 2: 1423 3: 400
4: 400 5: 400 6: 400 7: 400 8: 400 9: 400 10: 400 11: 400 12: 1459
13: 1397 14: 400 15: 400 16: 1397 bogomips: 105401
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3
Vulnerabilities: <filter>
Graphics:
Device-1: AMD Phoenix1 vendor: Lenovo driver: amdgpu v: kernel arch: RDNA-3
code: Phoenix process: TSMC n4 (4nm) built: 2023+ pcie: gen: 4
speed: 16 GT/s lanes: 16 ports: active: eDP-1 empty: DP-1, DP-2, DP-3,
DP-4, DP-5, DP-6, HDMI-A-1, Writeback-1 bus-ID: 64:00.0 chip-ID: 1002:15bf
class-ID: 0300 temp: 29.0 C
Device-2: Syntek Integrated Camera driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-1:2 chip-ID: 174f:1812
class-ID: fe01 serial: <filter>
Display: wayland server: X.org v: 1.21.1.13 with: Xwayland v: 23.2.6
compositor: kwin_wayland driver: X: loaded: amdgpu unloaded: modesetting
alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: 0
Monitor-1: eDP-1 res: 1920x1200 size: N/A modes: N/A
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast surfaceless: drv: radeonsi wayland: drv: radeonsi x11:
drv: radeonsi inactive: gbm
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.0.5-arch1.1
glx-v: 1.4 direct-render: yes renderer: AMD Radeon Graphics (radeonsi
gfx1103_r1 LLVM 17.0.6 DRM 3.57 6.8.7-zen1-1-zen) device-ID: 1002:15bf
memory: 1000 MiB unified: no display-ID: :1.0
API: Vulkan v: 1.3.279 layers: 9 device: 0 type: integrated-gpu name: AMD
Radeon Graphics (RADV GFX1103_R1) driver: mesa radv v: 24.0.5-arch1.1
device-ID: 1002:15bf surfaces: xcb,xlib,wayland device: 1 type: cpu
name: llvmpipe (LLVM 17.0.6 256 bits) driver: mesa llvmpipe
v: 24.0.5-arch1.1 (LLVM 17.0.6) device-ID: 10005:0000
surfaces: xcb,xlib,wayland
Audio:
Device-1: AMD Rembrandt Radeon High Definition Audio vendor: Lenovo
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 64:00.1 chip-ID: 1002:1640 class-ID: 0403
Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Lenovo
driver: snd_pci_ps v: kernel alternate: snd_pci_acp3x, snd_rn_pci_acp3x,
snd_pci_acp5x, snd_pci_acp6x, snd_acp_pci, snd_rpl_pci_acp6x,
snd_sof_amd_renoir, snd_sof_amd_rembrandt, snd_sof_amd_vangogh,
snd_sof_amd_acp63 pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 64:00.5
chip-ID: 1022:15e2 class-ID: 0480
Device-3: AMD Family 17h/19h HD Audio vendor: Lenovo driver: snd_hda_intel
v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 64:00.6
chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.8.7-zen1-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: Lenovo driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
port: 6000 bus-ID: 01:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp1s0f0 state: down mac: <filter>
Device-2: Qualcomm QCNFA765 Wireless Network Adapter vendor: Lenovo
driver: ath11k_pci v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 1
bus-ID: 02:00.0 chip-ID: 17cb:1103 class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
Info: services: NetworkManager, smbd, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: USI driver: btusb v: 0.8 type: USB rev: 1.1 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 1-3.1:4 chip-ID: 10ab:9309 class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.3
lmp-v: 12 status: discoverable: no pairing: no class-ID: 6c010c
Drives:
Local Storage: total: 953.87 GiB used: 14.42 GiB (1.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Lexar model: SSD NM790 1TB
size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 11296 temp: 38.9 C scheme: GPT
Partition:
ID-1: / raw-size: 920.5 GiB size: 920.5 GiB (100.00%) used: 14.42 GiB (1.6%)
fs: btrfs dev: /dev/dm-1 maj-min: 254:1
mapped: luks-5803f3bc-a82d-4509-862a-38b38f45ade8
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 728 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 920.5 GiB size: 920.5 GiB (100.00%)
used: 14.42 GiB (1.6%) fs: btrfs dev: /dev/dm-1 maj-min: 254:1
mapped: luks-5803f3bc-a82d-4509-862a-38b38f45ade8
ID-4: /var/log raw-size: 920.5 GiB size: 920.5 GiB (100.00%)
used: 14.42 GiB (1.6%) fs: btrfs dev: /dev/dm-1 maj-min: 254:1
mapped: luks-5803f3bc-a82d-4509-862a-38b38f45ade8
ID-5: /var/tmp raw-size: 920.5 GiB size: 920.5 GiB (100.00%)
used: 14.42 GiB (1.6%) fs: btrfs dev: /dev/dm-1 maj-min: 254:1
mapped: luks-5803f3bc-a82d-4509-862a-38b38f45ade8
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: partition size: 33.07 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/dm-0 maj-min: 254:0
mapped: luks-f7e8111b-885e-43b9-b3e0-ce114a23f4c2
ID-2: swap-2 type: zram size: 30.06 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 16 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 30.0 C mobo: N/A gpu: amdgpu temp: 29.0 C
Fan Speeds (rpm): fan-1: 0 fan-2: 0
Info:
Memory: total: 32 GiB note: est. available: 30.06 GiB used: 2.4 GiB (8.0%)
Processes: 431 Power: uptime: 37m states: freeze,mem,disk suspend: s2idle
wakeups: 1 hibernate: platform avail: shutdown, reboot, suspend, test_resume
image: 12.01 GiB services: org_kde_powerdevil, power-profiles-daemon,
upowerd Init: systemd v: 255 default: graphical tool: systemctl
Packages: pm: pacman pkgs: 1981 libs: 550 tools: octopi,paru Compilers:
clang: 17.0.6 gcc: 13.2.1 Shell: garuda-inxi default: fish v: 3.7.1
running-in: konsole inxi: 3.3.34
Garuda (2.6.26-1):
System install date:     2024-04-18
Last full system update: 2024-04-19 ↻
Is partially upgraded:   No
Relevant software:       snapper NetworkManager dracut
Windows dual boot:       Probably (Run as root to verify)
Failed units:


Please post garuda-inxi, and check FireDragons settings.

Hmm turns out FireDragon depends on Libinput Gestures, specifically Alt+Left/Right arrow. If I delete these, FireDragon lacks completely gestures navigation. Same thing with Floorp, so I guess this is from where the issue comes.

Hmm, forcing FireDragon to use Wayland with MOZ_ENABLE_WAYLAND=1 seems to fix the problems.

2 Likes

Oh yes, that seems to make sense. The environment variable is already added to the presets our new ISO will use.

2 Likes

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.