Hibernation in Garuda gnome

System:
  Kernel: 6.5.3-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=db5ad2d3-011a-415d-b500-980cffc68a0c rw rootflags=subvol=@
    quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0
    resume=UUID=4d1e366d-81b5-4f61-89b6-9f79c56f1412 loglevel=3 ibt=off
  Desktop: GNOME v: 44.5 tk: GTK v: 3.24.38 wm: gnome-shell dm: 1: GDM
    v: 44.1 2: SDDM note: stopped Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Laptop System: ASUSTeK product: ZenBook UX325EA_UX325EA v: 1.0
    serial: <superuser required>
  Mobo: ASUSTeK model: UX325EA v: 1.0 serial: <superuser required>
    UEFI: American Megatrends LLC. v: UX325EA.317 date: 08/09/2022
Battery:
  ID-1: BAT0 charge: 51.6 Wh (89.0%) condition: 58.0/67.1 Wh (86.5%)
    volts: 15.9 min: 15.9 model: ASUSTeK UX325 type: Li-ion serial: <filter>
    status: not charging cycles: 153
CPU:
  Info: model: 11th Gen Intel Core i5-1135G7 bits: 64 type: MT MCP
    arch: Tiger Lake gen: core 11 level: v4 note: check built: 2020
    process: Intel 10nm family: 6 model-id: 0x8C (140) stepping: 1
    microcode: 0xAC
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 320 KiB desc: d-4x48 KiB; i-4x32 KiB L2: 5 MiB desc: 4x1.2 MiB L3: 8 MiB
    desc: 1x8 MiB
  Speed (MHz): avg: 462 high: 901 min/max: 400/4200 scaling:
    driver: intel_pstate governor: powersave cores: 1: 400 2: 901 3: 400 4: 400
    5: 400 6: 400 7: 400 8: 400 bogomips: 38707
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics] vendor: ASUSTeK
    driver: i915 v: kernel arch: Gen-12.1 process: Intel 10nm built: 2020-21
    ports: active: eDP-1 empty: DP-1, DP-2, DP-3, DP-4, HDMI-A-1, HDMI-A-2,
    HDMI-A-3, HDMI-A-4, HDMI-A-5 bus-ID: 0000:00:02.0 chip-ID: 8086:9a49
    class-ID: 0300
  Device-2: Quanta USB2.0 HD UVC WebCam driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-6:3 chip-ID: 0408:30c0
    class-ID: fe01 serial: <filter>
  Display: wayland server: X.org v: 1.21.1.8 with: Xwayland v: 23.2.0
    compositor: gnome-shell driver: X: loaded: modesetting
    alternate: fbdev,intel,vesa dri: iris gpu: i915 display-ID: 0
  Monitor-1: eDP-1 model: Samsung 0x4158 built: 2020 res: 1920x1080 dpi: 166
    gamma: 1.2 size: 294x165mm (11.57x6.5") diag: 337mm (13.3") ratio: 16:9
    modes: 1920x1080
  Message: No known Wayland EGL/GBM data sources. API: EGL/GBM
Audio:
  Device-1: Intel Tiger Lake-LP Smart Sound Audio vendor: ASUSTeK
    driver: sof-audio-pci-intel-tgl
    alternate: snd_hda_intel,snd_sof_pci_intel_tgl bus-ID: 0000:00:1f.3
    chip-ID: 8086:a0c8 class-ID: 0401
  API: ALSA v: k6.5.3-zen1-1-zen status: kernel-api tools: N/A
  Server-1: PipeWire v: 0.3.80 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Wi-Fi 6 AX201 driver: iwlwifi v: kernel bus-ID: 0000:00:14.3
    chip-ID: 8086:a0f0 class-ID: 0280
  IF: wlo1 state: up mac: <filter>
Bluetooth:
  Device-1: Intel AX201 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-10:4 chip-ID: 8087:0026
    class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.2
    lmp-v: 11 status: discoverable: no pairing: no class-ID: 6c010c
RAID:
  Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd
    v: 0.6 port: N/A bus-ID: 0000:00:0e.0 chip-ID: 8086:9a0b rev: class-ID: 0104
Drives:
  Local Storage: total: 476.94 GiB used: 21.94 GiB (4.6%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix model: HFM512GD3JX013N
    size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 41000C20 temp: 36.9 C
    scheme: GPT
Partition:
  ID-1: / raw-size: 25 GiB size: 25 GiB (100.00%) used: 21.94 GiB (87.8%)
    fs: btrfs dev: /dev/nvme0n1p8 maj-min: 259:8
  ID-2: /boot/efi raw-size: 1024 MiB size: 1022 MiB (99.80%)
    used: 580 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p6 maj-min: 259:6
  ID-3: /home raw-size: 25 GiB size: 25 GiB (100.00%)
    used: 21.94 GiB (87.8%) fs: btrfs dev: /dev/nvme0n1p8 maj-min: 259:8
  ID-4: /var/log raw-size: 25 GiB size: 25 GiB (100.00%)
    used: 21.94 GiB (87.8%) fs: btrfs dev: /dev/nvme0n1p8 maj-min: 259:8
  ID-5: /var/tmp raw-size: 25 GiB size: 25 GiB (100.00%)
    used: 21.94 GiB (87.8%) fs: btrfs dev: /dev/nvme0n1p8 maj-min: 259:8
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: partition size: 9.59 GiB used: 0 KiB (0.0%)
    priority: -2 dev: /dev/nvme0n1p9 maj-min: 259:9
  ID-2: swap-2 type: zram size: 15.32 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 8 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 43.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Processes: 268 Uptime: 19m wakeups: 1506 Memory: total: 16 GiB
  available: 15.32 GiB used: 2.6 GiB (16.9%) Init: systemd v: 254
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages: 1231
  pm: pacman pkgs: 1219 libs: 389 tools: pamac,paru pm: flatpak pkgs: 12
  Shell: fish v: 3.6.1 default: Bash v: 5.1.16 running-in: gnome-terminal
  inxi: 3.3.29
Garuda (2.6.16-1):
  System install date:     2023-09-16
  Last full system update: 2023-09-16
  Is partially upgraded:   Yes
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       Probably (Run as root to verify)
  Failed units:            

Really need a step by step process as hibernetion doesnt work properly in gnome.

Hibernation or sleep? They are different things and it’s crucial you’re sure which one is not working for you before we can offer assistance. A lot of people say hibernate but actually mean sleep.

Also, what part of it doesn’t work? You’ve offered zero information at all.

2 Likes

A shot in the dark:

The guide in general is here:
https://wiki.archlinux.org/title/Power_management/Suspend_and_hibernate
But this is the above addendum:
https://wiki.archlinux.org/title/Dracut#Hibernation
In case of further troubles, you could try switching to the LTS kernel.
Last but not least, this should be fixed, normally with a garuda-update:

2 Likes

Whenever I use systemctl hibernate it just poweroff and after restart all previously opened programmes are gone. Sleep/suspend works fine but hibernation ( using swap) doesn’t work at all.

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.