Hi Guys I really need some help here I was doing this all wrong

Issues & Assistance Networking Support
1

Hi Guys I really need some help here I was doing this all wrong

Hi Guys I really need some help here I was doing this all wrong
as you see in my picture i did number 1

number 2 i got a messege i dont have the powerpill

but number 3 ad mirrorslist what list? and how?

ksnip_20230213-060403
ksnip_20230213-0604032036×1307 127 KB 

ystem:
  Kernel: 6.1.11-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=0bcebc11-6ba9-4b23-8b4a-addbda934f51 rw rootflags=subvol=@
    quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
    loglevel=3 ibt=off
  Desktop: MATE v: 1.26.0 info: mate-panel wm: marco v: 1.26.1 vt: 7
    dm: LightDM v: 1.32.0 Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
  Mobo: ASUSTeK model: PRIME Z490-A v: Rev 1.xx serial: <superuser required>
    UEFI: American Megatrends v: 2601 date: 05/17/2022
CPU:
  Info: model: Intel Core i7-10700K bits: 64 type: MT MCP arch: Comet Lake
    gen: core 10 level: v3 note: check built: 2020 process: Intel 14nm family: 6
    model-id: 0xA5 (165) stepping: 5 microcode: 0xF4
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
    L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 2 MiB desc: 8x256 KiB
    L3: 16 MiB desc: 1x16 MiB
  Speed (MHz): avg: 3800 min/max: 800/5100 scaling: driver: intel_pstate
    governor: performance cores: 1: 3800 2: 3800 3: 3800 4: 3800 5: 3800 6: 3800
    7: 3800 8: 3800 9: 3800 10: 3800 11: 3800 12: 3800 13: 3800 14: 3800
    15: 3800 16: 3800 bogomips: 121596
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
  Vulnerabilities: <filter>
Graphics:
  Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
    vendor: ASUSTeK driver: amdgpu v: kernel arch: GCN-4 code: Arctic Islands
    process: GF 14nm built: 2016-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
    ports: active: HDMI-A-1 empty: DP-1, DP-2, DVI-D-1, HDMI-A-2
    bus-ID: 01:00.0 chip-ID: 1002:67df class-ID: 0300 temp: 49.0 C
  Display: x11 server: X.Org v: 21.1.7 compositor: marco v: 1.26.1 driver:
    X: loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa dri: radeonsi
    gpu: amdgpu display-ID: :0 screens: 1
  Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00")
    s-diag: 777mm (30.58")
  Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: AOC Q32G1WG4 serial: <filter>
    built: 2019 res: 2560x1440 dpi: 93 gamma: 1.2 size: 697x393mm (27.44x15.47")
    diag: 800mm (31.5") ratio: 16:9 modes: max: 2560x1440 min: 720x400
  API: OpenGL v: 4.6 Mesa 22.3.4 renderer: AMD Radeon RX 580 Series
    (polaris10 LLVM 15.0.7 DRM 3.49 6.1.11-zen1-1-zen) direct-render: Yes
Audio:
  Device-1: Intel Comet Lake PCH cAVS vendor: ASUSTeK driver: snd_hda_intel
    v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3
    chip-ID: 8086:06c8 class-ID: 0403
  Device-2: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
    vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 16 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.1
    chip-ID: 1002:aaf0 class-ID: 0403
  Sound API: ALSA v: k6.1.11-zen1-1-zen running: yes
  Sound Server-1: PulseAudio v: 16.1 running: no
  Sound Server-2: PipeWire v: 0.3.65 running: yes
Network:
  Device-1: Intel Ethernet I225-V vendor: ASUSTeK driver: igc v: kernel pcie:
    gen: 2 speed: 5 GT/s lanes: 1 port: N/A bus-ID: 04:00.0 chip-ID: 8086:15f3
    class-ID: 0200
  IF: enp4s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 3.18 TiB used: 1.1 TiB (34.6%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
    model: WDS250G2B0C-00PXH0 size: 232.89 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 211070WD temp: 35.9 C scheme: GPT
  ID-2: /dev/nvme1n1 maj-min: 259:3 vendor: Samsung
    model: SSD 970 EVO Plus 250GB size: 232.89 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 2B2QEXM7 temp: 43.9 C
  ID-3: /dev/sda maj-min: 8:0 vendor: Toshiba model: HDWD130 size: 2.73 TiB
    block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD
    rpm: 7200 serial: <filter> rev: ACF0 scheme: GPT
Partition:
  ID-1: / raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
    used: 14.79 GiB (6.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 608 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
  ID-3: /home raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
    used: 14.79 GiB (6.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-4: /var/log raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
    used: 14.79 GiB (6.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-5: /var/tmp raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
    used: 14.79 GiB (6.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 31.25 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 42.0 C mobo: N/A gpu: amdgpu temp: 49.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 1192
Info:
  Processes: 355 Uptime: 31m wakeups: 0 Memory: 31.25 GiB
  used: 3.09 GiB (9.9%) Init: systemd v: 252 default: graphical
  tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7 Packages: pm: pacman
  pkgs: 1567 libs: 472 tools: gnome-software,octopi,pamac,paru pm: appimage
  pkgs: 0 pm: flatpak pkgs: 0 Shell: fish v: 3.6.0 running-in: mate-terminal
  inxi: 3.3.25
Garuda (2.6.14-1):
  System install date:     2023-02-13
  Last full system update: 2023-02-13
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager mkinitcpio
  Windows dual boot:       No/Undetected
  Failed units:
2

Why do you need to do that?
Chaotic-aur should be already configured in our systems.

4 Likes
3

thank you for saying that I was just following the steps in the WIKI
why do they still have these steps in the WIKI ?

1 Like
4

Navigate to 'etc/' in Dolphin, then right click an empty space and click "open in terminal". Then type 'sudo nano pacman.conf' and it should open up the file that you need to edit.
Then you will add the below to the bottom of that file (assuming you don't have any addition third party repositories).

Screenshot_20230212_231707
Screenshot_20230212_2317071440×279 14.2 KB

Ctrl+X to save and exit the file then you can do 'pacman -Su' to update the mirrorlist or just use 'garuda-update'. Sorry, on mobile otherwise I'd use better screenshots.

5

Because chaotic-aur can be used also in other distros.

4 Likes
6

Yes it should already be in there. I assumed you accidentally removed it.

7

@glomar_response

Thanks Bud but no
I got this Part

its the other part

It Doesn't matter any more but only if u guys knew how much i suffered from these steps before :frowning:

1 Like
9

Why did you suffer? Chaotic is enabled by default on every Garuda distro, so you shouldn't have had to struggle at all since they were already there...

2 Likes
10

micro, Garuda use micro :wink:

pacman supports parallel downloads natively now, no need for powerpill.

Maybe someone can change the text on the chaotic web page (@dr460nf1r3 , @Technetium , @Naman (Web designer)) ?

8 Likes
11

Oops, my bad! My roots came from debian based, so I used nano for years. Will remember for future responses. :sweat_smile:

4 Likes
12

I Like nano :+1:

1 Like
13

Prefer Nano.

3 Likes
14

Wait, really? I’ve never used Micro, and Nano seems to be the default for some things :thinking:

image
image2002×1054 85.1 KB

I’ve only ever used Nano and Vim in the console, lol

2 Likes
15

Nano is fine, I use it a long time.
Micro is even easier to use and probably included in all Garuda DE's except Xfce?
Why would you want to do Vi(M) for a small change in the / area.
But all have their justification in different areas.

You could extend the elitist Arch saying :slight_smile:

By the way, I use Arch and Vim! :wink:

5 Likes
16

Because we are already off topic here,
Sending text as an image is counterproductive (not copyable or searchable) and unnecessarily increases the memory, traffic and backups of the forum.

Even more comfortable would be here, open in terminal

sudo micro /etc/pacman.conf

add

[chaotic-aur]
Include = /etc/pacman.d/chaotic-mirrorlist
But life is not a wish concert :smiley:

On the other hand, we don’t want to raise any helper vampires by spoonfeeding them.

4 Likes
17

@Firas now I finally understand why I keep seeing this output in your inxi!

error: could not register 'chaotic-aur' database (database already registered)
8 Likes
18

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.