Getting Unified remote server working in Garuda Linux

Kernel: 6.5.3-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=9dfa3cd3-b67f-4ff1-a3da-9de52cd08534 rw rootflags=subvol=@
quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=5fc9d60a-f2ad-49f3-af04-3019d7ce8ca1 loglevel=3 ibt=off
Desktop: KDE Plasma v: 5.27.8 tk: Qt v: 5.15.10 wm: kwin_x11 vt: 2
dm: SDDM Distro: Garuda Linux base: Arch Linux
Type: Laptop System: Dell product: Latitude E5440 v: 00
serial: <superuser required> Chassis: type: 9 serial: <superuser required>
Mobo: Dell model: 05JPFR v: A00 serial: <superuser required> UEFI: Dell
v: A21 date: 02/01/2018
ID-1: BAT0 charge: 32.2 Wh (100.0%) condition: 32.2/66.6 Wh (48.3%)
volts: 12.4 min: 11.1 model: LGC-LGC3.0 DELL NVWGM44 type: Li-ion
serial: <filter> status: full
Info: model: Intel Core i5-4300U bits: 64 type: MT MCP arch: Haswell
gen: core 4 level: v3 note: check built: 2013-15 process: Intel 22nm
family: 6 model-id: 0x45 (69) stepping: 1 microcode: 0x26
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 810 high: 849 min/max: 800/2900 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 849 2: 798 3: 798 4: 798
bogomips: 19953
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Device-1: Intel Haswell-ULT Integrated Graphics vendor: Dell driver: i915
v: kernel arch: Gen-7.5 process: Intel 22nm built: 2013 ports: active: eDP-1
empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:0a16
class-ID: 0300
Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.2.0
compositor: kwin_x11 driver: X: loaded: modesetting
alternate: fbdev,intel,vesa dri: crocus gpu: i915 display-ID: :0
screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99")
s-diag: 414mm (16.31")
Monitor-1: eDP-1 model: LG Display 0x03e5 built: 2012 res: 1366x768 hz: 60
dpi: 112 gamma: 1.2 size: 309x174mm (12.17x6.85") diag: 355mm (14")
ratio: 16:9 modes: 1366x768
API: OpenGL v: 4.6 Mesa 23.1.7-arch1.1 renderer: Mesa Intel HD Graphics
4400 (HSW GT2) direct-render: Yes
Device-1: Intel Haswell-ULT HD Audio vendor: Dell driver: snd_hda_intel
v: kernel bus-ID: 00:03.0 chip-ID: 8086:0a0c class-ID: 0403
Device-2: Intel 8 Series HD Audio vendor: Dell 8 driver: snd_hda_intel
v: kernel bus-ID: 00:1b.0 chip-ID: 8086:9c20 class-ID: 0403
API: ALSA v: k6.5.3-zen1-1-zen status: kernel-api tools: N/A
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 0.3.80 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Device-1: Intel Ethernet I218-LM vendor: Dell driver: e1000e v: kernel
port: f080 bus-ID: 00:19.0 chip-ID: 8086:155a class-ID: 0200
IF: eno1 state: down mac: <filter>
Device-2: Intel Wireless 7260 driver: iwlwifi v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:08b1 class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-1.8.2:4
chip-ID: 8087:07dc class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 3 state: up address: <filter> bt-v: 4.0
lmp-v: 6 status: discoverable: no pairing: no class-ID: 7c010c
Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci
v: 3.0 port: f060 bus-ID: 00:1f.2 chip-ID: 8086:282a rev: N/A class-ID: 0104
Local Storage: total: 119.24 GiB used: 22.63 GiB (19.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD SM841 2.5 7mm 128GB
size: 119.24 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 2D0Q scheme: GPT
ID-1: / raw-size: 110.15 GiB size: 110.15 GiB (100.00%)
used: 22.63 GiB (20.5%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 576 KiB (0.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 110.15 GiB size: 110.15 GiB (100.00%)
used: 22.63 GiB (20.5%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-4: /var/log raw-size: 110.15 GiB size: 110.15 GiB (100.00%)
used: 22.63 GiB (20.5%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-5: /var/tmp raw-size: 110.15 GiB size: 110.15 GiB (100.00%)
used: 22.63 GiB (20.5%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 7.67 GiB used: 1.25 GiB (16.3%)
priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 4
dev: /dev/zram0
ID-2: swap-2 type: partition size: 8.8 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sda3 maj-min: 8:3
System Temperatures: cpu: 53.0 C mobo: 35.0 C sodimm: SODIMM C
Fan Speeds (rpm): cpu: 0
Processes: 271 Uptime: 56m wakeups: 1 Memory: total: 8 GiB
available: 7.67 GiB used: 4.41 GiB (57.6%) Init: systemd v: 254
default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages:
pm: pacman pkgs: 1517 libs: 404 tools: gnome-software,octopi,pamac,paru
Shell: fish v: 3.6.1 default: Bash v: 5.1.16 running-in: konsole
inxi: 3.3.29
Garuda (2.6.16-1):
System install date:     2023-09-16
Last full system update: 2023-09-19 ↻
Is partially upgraded:   No
Relevant software:       snapper NetworkManager dracut
Windows dual boot:       No/Undetected
Failed units:

I’m having issues with getting Unified remote server working in Garuda Linux. (This is probably an issue on how im installing/extracting the program.

After downloading the 64 portable bit archive from here:

i can extract the folder to /home/user/Downloads/urserver-

but after i double click the urserver execuable icon nothing happens. I’ve used it in windows before and after it installs it gives you a server ip address and you can set the up on the mobile app (i’m using android 12 if it matters) thanks in advanced!

It,s in the aur repo
just install it from there

paru Unified remote server


Welcome to Garuda Linux! :wave:

For Arch Linux and other Arch-based distributions like Garuda and Endeavour, we don’t normally download a file straight off the site like Windows unless there is really no other choice, because then you need to convert the package for Arch to understand. It also makes it harder to update because you need to do it manually every time.

It’s always best to check the Arch Linux Repositories. You can use tools like Pacseek, pacman -Ss package-name or directly check the websites:
Main repos:

Arch User Repository:

TilliDie’s answer will definitely get you the package you need. This info is a supplement to help you in the future when it comes to finding and installing packages :wink:

Have fun, and if you have any questions feel free to ask.


This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.