Garuda Network Mngr & Boot Options not opening

Issues & Assistance
1

Garuda network manager/garuda boot options/network settings and others are not opening. Cannot run anything in Garuda Assistant nor uninstall games from Garuda Gamer. Previous issue listed here is fixed, now the OS is not responding properly when trying to modify network settings, remove preinstalled games, or access those settings. GRUB delay was manually changed via console, but no other changes have been made.

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_ADDRESS = "en_US.UTF-8/UTF-8",
	LC_NAME = "en_US.UTF-8/UTF-8",
	LC_MONETARY = "en_US.UTF-8/UTF-8",
	LC_PAPER = "en_US.UTF-8/UTF-8",
	LC_IDENTIFICATION = "en_US.UTF-8/UTF-8",
	LC_TELEPHONE = "en_US.UTF-8/UTF-8",
	LC_MEASUREMENT = "en_US.UTF-8/UTF-8",
	LC_TIME = "en_US.UTF-8/UTF-8",
	LC_NUMERIC = "en_US.UTF-8/UTF-8",
	LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
System:
  Kernel: 5.19.11-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=809146c0-942a-400e-add5-2675427eefd8 rw rootflags=subvol=@
    quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
    loglevel=3
  Desktop: KDE Plasma v: 5.25.5 tk: Qt v: 5.15.6 info: latte-dock
    wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: ASUSTeK model: TUF GAMING X570-PLUS (WI-FI) v: Rev X.0x
    serial: <superuser required> UEFI: American Megatrends v: 4204
    date: 02/25/2022
CPU:
  Info: model: AMD Ryzen 9 5900X bits: 64 type: MT MCP arch: Zen 3 gen: 4
    level: v3 built: 2021-22 process: TSMC n7 (7nm) family: 0x19 (25)
    model-id: 0x21 (33) stepping: 0 microcode: 0xA201016
  Topology: cpus: 1x cores: 12 tpc: 2 threads: 24 smt: enabled cache:
    L1: 768 KiB desc: d-12x32 KiB; i-12x32 KiB L2: 6 MiB desc: 12x512 KiB
    L3: 64 MiB desc: 2x32 MiB
  Speed (MHz): avg: 4197 high: 4200 min/max: 2200/5619 boost: disabled
    scaling: driver: acpi-cpufreq governor: performance cores: 1: 4193 2: 4200
    3: 4200 4: 4200 5: 4200 6: 4200 7: 4200 8: 4200 9: 4200 10: 4200 11: 4199
    12: 4200 13: 4200 14: 4200 15: 4177 16: 4165 17: 4200 18: 4200 19: 4200
    20: 4200 21: 4200 22: 4200 23: 4200 24: 4200 bogomips: 201601
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GA102 [GeForce RTX 3080 12GB] vendor: eVga.com.
    driver: nvidia v: 515.76 alternate: nouveau,nvidia_drm non-free: 515.xx+
    status: current (as of 2022-08) arch: Ampere code: GAxxx process: TSMC n7
    (7nm) built: 2020-22 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 link-max:
    gen: 4 speed: 16 GT/s bus-ID: 08:00.0 chip-ID: 10de:220a class-ID: 0300
  Display: x11 server: X.Org v: 21.1.4 with: Xwayland v: 22.1.3
    compositor: kwin_x11 driver: X: loaded: nvidia unloaded: modesetting
    alternate: fbdev,nouveau,nv,vesa gpu: nvidia display-ID: :0 screens: 1
  Screen-1: 0 s-res: 4920x1920 s-dpi: 80 s-size: 1562x609mm (61.50x23.98")
    s-diag: 1677mm (66")
  Monitor-1: DP-1 pos: primary,top-left res: 1080x1920 hz: 60 dpi: 94
    size: 293x521mm (11.54x20.51") diag: 598mm (23.53") modes: N/A
  Monitor-2: DP-2 pos: primary,bottom-c res: 1920x1080 dpi: 82
    size: 598x336mm (23.54x13.23") diag: 686mm (27.01") modes: N/A
  Monitor-3: HDMI-0 pos: bottom-r res: 1920x1080 hz: 60 dpi: 94
    size: 520x290mm (20.47x11.42") diag: 595mm (23.44") modes: N/A
  OpenGL: renderer: NVIDIA GeForce RTX 3080/PCIe/SSE2 v: 4.6.0 NVIDIA
    515.76 direct render: Yes
Audio:
  Device-1: NVIDIA GA102 High Definition Audio vendor: eVga.com.
    driver: snd_hda_intel bus-ID: 5-1:2 v: kernel pcie: chip-ID: b58e:9e84
    class-ID: 0300 gen: 4 speed: 16 GT/s serial: <filter> lanes: 16
    bus-ID: 08:00.1 chip-ID: 10de:1aef class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 0a:00.4 chip-ID: 1022:1487 class-ID: 0403
  Device-3: Blue Microphones Yeti Stereo Microphone type: USB
    driver: hid-generic,snd-usb-audio,usbhid
  Sound Server-1: ALSA v: k5.19.11-zen1-1-zen running: yes
  Sound Server-2: PulseAudio v: 16.1 running: no
  Sound Server-3: PipeWire v: 0.3.58 running: yes
Network:
  Device-1: Intel Wireless-AC 9260 driver: iwlwifi v: kernel pcie: gen: 2
    speed: 5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:2526 class-ID: 0280
  IF: wlp3s0 state: down mac: <filter>
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: ASUSTeK driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: f000 bus-ID: 04:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp4s0 state: up speed: 100 Mbps duplex: full mac: <filter>
  IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
Bluetooth:
  Device-1: Intel Wireless-AC 9260 Bluetooth Adapter type: USB driver: btusb
    v: 0.8 bus-ID: 3-5:2 chip-ID: 8087:0025 class-ID: e001
  Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
Drives:
  Local Storage: total: 2.05 TiB used: 1.2 TiB (58.5%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital
    model: WD10EZEX-00BN5A0 size: 931.51 GiB block-size: physical: 4096 B
    logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
    rev: 1A01 scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital
    model: WD10EZEX-00BN5A0 size: 931.51 GiB block-size: physical: 4096 B
    logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
    rev: 1A01 scheme: MBR
  ID-3: /dev/sdc maj-min: 8:32 vendor: Samsung model: SSD 850 PRO 256GB
    size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 3B6Q scheme: GPT
Partition:
  ID-1: / raw-size: 238.17 GiB size: 238.17 GiB (100.00%) used: 21.93 GiB
    (9.2%) fs: btrfs dev: /dev/sdc2 maj-min: 8:34
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%) used: 608 KiB
    (0.2%) fs: vfat dev: /dev/sdc1 maj-min: 8:33
  ID-3: /home raw-size: 238.17 GiB size: 238.17 GiB (100.00%) used: 21.93
    GiB (9.2%) fs: btrfs dev: /dev/sdc2 maj-min: 8:34
  ID-4: /var/log raw-size: 238.17 GiB size: 238.17 GiB (100.00%) used: 21.93
    GiB (9.2%) fs: btrfs dev: /dev/sdc2 maj-min: 8:34
  ID-5: /var/tmp raw-size: 238.17 GiB size: 238.17 GiB (100.00%) used: 21.93
    GiB (9.2%) fs: btrfs dev: /dev/sdc2 maj-min: 8:34
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 62.71 GiB used: 1.8 MiB (0.0%)
    priority: 100 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 44.9 C mobo: N/A gpu: nvidia temp: 34 C
  Fan Speeds (RPM): N/A gpu: nvidia fan: 32%
Info:
  Processes: 433 Uptime: 16m wakeups: 0 Memory: 62.71 GiB used: 5.5 GiB
  (8.8%) Init: systemd v: 251 default: graphical tool: systemctl Compilers:
  gcc: 12.2.0 clang: 14.0.6 Packages: pm: pacman pkgs: 1864 libs: 515
  tools: octopi,pamac,paru Shell: Bash v: 5.1.16 running-in: kitty
  inxi: 3.3.21
Garuda (2.6.8-1):
  System install date:     2022-09-27
  Last full system update: 2022-09-28
  Is partially upgraded:   No
  Relevant software:       NetworkManager
  Windows dual boot:       No/Undetected
  Snapshots:               Snapper
  Failed units:

@MANTISxB was the one controlling my previous post and handling my issues. I'm way less linux-literate as he is so he will help me to understand some of the replies.

3

It looks like some other changes have been made. :smirk:

What other terminals are installed? Some of the Garuda Assistant tools are only supported by certain terminals.

cat /usr/lib/garuda/launch-terminal
3 Likes
4

While Wildcard is at work, I can add onto this a little as I was there for the External HDD issue was the one talking typing here through her account.

On a fresh install after the ExHDD was removed, the issue was present. Prior to update, when trying to open Garuda Boot Manager/Network Manager the screens would appear briefly, then close. On rare occassions Alacritty would open show an error and close before i was able to see what it was.

The PC was then Updated fully. Issue still persisted.

Not sure if it matters, adding in case: CMOS died (Time off in BIOS) and that was fixed earlier today. One of the errors i found related to a timecode error, so we stopped all attempts at fixing anything until the CMOS was replaced, just in case.

Alacritty and Konsole should both still be installed, kitty was recommended by me a while back as ive been using it on my system for a pretty long time. (Didnt know it would cause issues, my Garuda Boot Manager and Network manager both open Alacritty when run. Same when hitting F4 in dolphin, alacritty opens up, kitty only with a shortcut.)

Thank you all again for the help. Just trying to get her system stable so we can play games again. This forum and the people in it are amazing.

5

It’s no problem to use Kitty, or any terminal emulator you like! Those specific programs only work with certain ones; as long as you haven’t uninstalled them all (at least one needs to be in there) it shouldn’t be a problem.

Try launching the programs from the terminal; maybe the output will offer some clues as to what is happening.

sudo garuda-boot-options

sudo garuda-network-assistant
1 Like
6

Mantis at wildcards place here.

sudo garuda-boot-options

will bring up the garuda boot options, but in white for some reason. WITHOUT sudo i get "You must run this program as root"

sudo garuda-network-assistant

Same thing, brings them up in all white but they do open. Without sudo i get "You must run this program as root"

8

Does seem the network manager and boot options to function as intended when run with sudo.

9

Redownloaded the file from the downloads page and reinstalled after wiping the SSD first. Everything works. Thank you all for the help!

10

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.