Garuda Linux upgrading system Error on fresh install from setup assistant

.
Hello amigos,

On a fresh install:

I booted up garuda , setup assistant popped up , system upgrade terminal popped up , asked for password and updated some things then asked yes no for installation for updates and I typed in yes .

Then Garuda setup assistant asked for printing support, audio player , video software,etc. I selected according to my choice and terminal popped up again.

Gave password asked Yes or no for installation, I typed in yes .

Started downloading and then came some errors like failed recieving garuda.db from mirror.something operation slow than bytes/sec and failed to recieve firefox.tar.xz from mirror.something operation slow than bytes/sec, failed to recieve packages , no packages were upgraded . Press enter to exit.

Then I used refresh mirrorlist from within the Garuda assistant and selected worldwide , china and India and saved it to Pacman.conf with assistant . Then the problem was solved . Had I done something wrong that caused these problems ? Also were these errors the mirrors' fault?

Garuda-Inxgi output :

System:
Kernel: 6.0.2-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=d6d5296e-410c-4558-af83-ebd08672e26c rw [email protected]
quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
loglevel=3
Desktop: KDE Plasma v: 5.26.4 tk: Qt v: 5.15.7 info: latte-dock
wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop System: HP product: HP All-in-One 22-df0xxx v: N/A
serial: Chassis: type: 13 serial:
Mobo: HP model: 87A4 v: 10100 serial: UEFI: AMI
v: F.31 date: 07/23/2021
CPU:
Info: model: Intel Core i3-1005G1 bits: 64 type: MT MCP arch: Ice Lake
gen: core 10 level: v4 note: check built: 2019-21 process: Intel 10nm
family: 6 model-id: 0x7E (126) stepping: 5 microcode: 0xB2
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
L1: 160 KiB desc: d-2x48 KiB; i-2x32 KiB L2: 1024 KiB desc: 2x512 KiB
L3: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 1042 high: 1200 min/max: 400/3400 scaling:
driver: intel_pstate governor: powersave cores: 1: 1007 2: 1200 3: 1077
4: 885 bogomips: 9523
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: Enhanced IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
filling, PBRSB-eIBRS: SW sequence
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Iris Plus Graphics G1 vendor: Hewlett-Packard driver: i915
v: kernel arch: Gen-11 process: Intel 10nm built: 2019-21 ports:
active: eDP-1 empty: DP-1, DP-2, DP-3, DP-4, HDMI-A-1 bus-ID: 00:02.0
chip-ID: 8086:8a56 class-ID: 0300
Device-2: Luxvisions Innotech HP TrueVision HD Camera type: USB
driver: uvcvideo bus-ID: 1-10:7 chip-ID: 30c9:0013 class-ID: 0e02
serial:
Display: x11 server: [X.Org](http://X.Org) v: 21.1.4 with: Xwayland v: 22.1.7
compositor: kwin_x11 driver: X: loaded: modesetting
alternate: fbdev,intel,vesa dri: iris gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
s-diag: 582mm (22.93")
Monitor-1: eDP-1 model: HP ALL-in-One serial: built: 2019
res: 1920x1080 hz: 60 dpi: 102 gamma: 1.2 size: 476x268mm (18.74x10.55")
diag: 546mm (21.5") ratio: 16:9 modes: 1920x1080
API: OpenGL v: 4.6 Mesa 22.3.1 renderer: Mesa Intel UHD Graphics (ICL GT1)
direct render: Yes
Audio:
Device-1: Intel Ice Lake-LP Smart Sound Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel alternate: snd_sof_pci_intel_icl
bus-ID: 00:1f.3 chip-ID: 8086:34c8 class-ID: 0403
Sound API: ALSA v: k6.0.2-zen1-1-zen running: yes
Sound Server-1: PulseAudio v: 16.1 running: no
Sound Server-2: PipeWire v: 0.3.63 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: 4000 bus-ID: 01:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp1s0 state: down mac:
Device-2: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtw_8821ce v: N/A modules: rtw88_8821ce
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 02:00.0
chip-ID: 10ec:c821 class-ID: 0280
IF: wlp2s0 state: up mac:
Bluetooth:
Device-1: Realtek Bluetooth 4.2 Adapter type: USB driver: btusb v: 0.8
bus-ID: 1-5:6 chip-ID: 0bda:b00a class-ID: e001 serial:
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address:
Drives:
Local Storage: total: 953.59 GiB used: 22.22 GiB (2.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD10EZEX-60WN4A1 size: 931.51 GiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial:
rev: 1A03 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: HP model: v220w
size: 7.55 GiB block-size: physical: 512 B logical: 512 B type: N/A
serial: rev: 1100 scheme: GPT
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: SanDisk model: Cruzer Blade
size: 14.53 GiB block-size: physical: 512 B logical: 512 B type: N/A
serial: rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 488.28 GiB size: 488.28 GiB (100.00%)
used: 22.22 GiB (4.6%) fs: btrfs dev: /dev/sda3 maj-min: 8:3
ID-2: /boot/efi raw-size: 513 MiB size: 512 MiB (99.80%)
used: 608 KiB (0.1%) fs: vfat dev: /dev/sda2 maj-min: 8:2
ID-3: /home raw-size: 488.28 GiB size: 488.28 GiB (100.00%)
used: 22.22 GiB (4.6%) fs: btrfs dev: /dev/sda3 maj-min: 8:3
ID-4: /var/log raw-size: 488.28 GiB size: 488.28 GiB (100.00%)
used: 22.22 GiB (4.6%) fs: btrfs dev: /dev/sda3 maj-min: 8:3
ID-5: /var/tmp raw-size: 488.28 GiB size: 488.28 GiB (100.00%)
used: 22.22 GiB (4.6%) fs: btrfs dev: /dev/sda3 maj-min: 8:3
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 7.53 GiB used: 328.2 MiB (4.3%)
priority: 100 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 46.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 217 Uptime: 2h 8m wakeups: 0 Memory: 7.53 GiB
used: 1.85 GiB (24.5%) Init: systemd v: 252 default: graphical
tool: systemctl Compilers: gcc: 12.2.0 clang: 14.0.6 Packages: pm: pacman
pkgs: 1382 libs: 342 tools: gnome-software,octopi,paru Shell: fish v: 3.5.1
default: Bash v: 5.1.16 running-in: konsole inxi: 3.3.24
Garuda (2.6.12-1):
System install date: 2022-12-29
Last full system update: 2022-12-29 ↻
Is partially upgraded: No
Relevant software: NetworkManager
Windows dual boot: No/Undetected
Snapshots: Snapper
Failed units:

Summary

@JaiTrideva
Post always your terminal in- and output as text like
~~~
garuda-inxi
System:
Kernel: 5.18.15-zen1-2-zen arch: x86_64 bits: 64 compiler: gcc v: 12.1.1
parameters:
~~~

looks like

garuda-inxi
System:
  Kernel: 5.18.15-zen1-2-zen arch: x86_64 bits: 64 compiler: gcc v: 12.1.1
    parameters:

in forum.

I have edited your post.
Welcome and greetings SGS

Thanks!

Did you use

garuda-update

in terminal?
If not, do :slight_smile:

2 Likes

Well I did this but doesn't the full upgrade in assistant and garuda-update do the same thing?

I am having a really hard time understanding what supposedly went wrong here, and with no logs this seems like a fools errand.

Sorry sir, I have now edited the post . You can now check . Hope it helps you to understand the issue well.

So from what I've gathered your internet connection was flakey for a couple moments and it failed to download a couple packages. I don't see what we can do to solve this unfortunately.

1 Like

Thanks! After your regard I resetted my fiber and the problem seems to be solved!

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.