garuda-inxi
ystem:
Kernel: 6.3.4-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.1.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=f3895e94-8ff2-4fe6-ba67-bc8695f1ae2c rw [email protected]
quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
loglevel=3 ibt=off
Desktop: KDE Plasma v: 5.27.5 tk: Qt v: 5.15.9 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Garuda Linux base: Arch Linux
Machine:
Type: Convertible System: HP product: HP Spectre x360 Convertible 15t-eb000
v: N/A serial: <superuser required> Chassis: type: 31
serial: <superuser required>
Mobo: HP model: 86E8 v: 01.77 serial: <superuser required> UEFI: AMI
v: F.16 date: 11/02/2022
Battery:
ID-1: BAT0 charge: 36.1 Wh (57.7%) condition: 62.6/62.6 Wh (100.0%)
volts: 10.8 min: 11.6 model: HP Primary type: Li-ion serial: <filter>
status: discharging cycles: 203
Device-1: hid-0018:04F3:2A54.0005-battery model: ELAN2514:00 04F3:2A54
serial: N/A charge: N/A status: N/A
CPU:
Info: model: Intel Core i7-10750H bits: 64 type: MT MCP arch: Comet Lake
gen: core 10 level: v3 note: check built: 2020 process: Intel 14nm family: 6
model-id: 0xA5 (165) stepping: 2 microcode: 0xF6
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB desc: 6x256 KiB
L3: 12 MiB desc: 1x12 MiB
Speed (MHz): avg: 1018 high: 1300 min/max: 800/5000 scaling:
driver: intel_pstate governor: powersave cores: 1: 1264 2: 1294 3: 1300
4: 900 5: 900 6: 900 7: 900 8: 900 9: 1165 10: 900 11: 900 12: 900
bogomips: 62399
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel CometLake-H GT2 [UHD Graphics] vendor: Hewlett-Packard
driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
ports: active: eDP-1 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0
chip-ID: 8086:9bc4 class-ID: 0300
Device-2: NVIDIA TU117M [GeForce GTX 1650 Ti Mobile]
vendor: Hewlett-Packard driver: nvidia v: 530.41.03
alternate: nouveau,nvidia_drm non-free: 530.xx+
status: current (as of 2023-05) arch: Turing code: TUxxx
process: TSMC 12nm FF built: 2018-22 pcie: gen: 3 speed: 8 GT/s lanes: 8
link-max: lanes: 16 bus-ID: 01:00.0 chip-ID: 10de:1f95 class-ID: 0300
Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.1.1
compositor: kwin_x11 driver: X: loaded: modesetting,nvidia unloaded: nouveau
alternate: fbdev,intel,nv,vesa dri: iris gpu: i915 display-ID: :0
screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 676x380mm (26.61x14.96")
s-diag: 775mm (30.53")
Monitor-1: eDP-1 model: Samsung 0x4143 built: 2019 res: 2560x1440 hz: 60
dpi: 189 gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5")
ratio: 16:9 modes: 3840x2160
API: OpenGL v: 4.6 Mesa 23.1.0 renderer: Mesa Intel UHD Graphics (CML GT2)
direct-render: Yes
Audio:
Device-1: Intel Comet Lake PCH cAVS vendor: Hewlett-Packard
driver: sof-audio-pci-intel-cnl alternate: snd_hda_intel, snd_soc_skl,
snd_sof_pci_intel_cnl bus-ID: 00:1f.3 chip-ID: 8086:06c8 class-ID: 0401
Device-2: NVIDIA vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
pcie: gen: 3 speed: 8 GT/s lanes: 8 link-max: lanes: 16 bus-ID: 01:00.1
chip-ID: 10de:10fa class-ID: 0403
API: ALSA v: k6.3.4-zen1-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 0.3.71 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Comet Lake PCH CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 00:14.3 chip-ID: 8086:06f0 class-ID: 0280
IF: wlo1 state: up mac: <filter>
Bluetooth:
Device-1: Intel AX201 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-14:3 chip-ID: 8087:0026
class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 0 state: down
bt-service: enabled,running rfk-block: hardware: no software: yes
address: <filter>
RAID:
Hardware-1: Intel Comet Lake PCH-H RAID driver: ahci v: 3.0 port: 4060
bus-ID: 00:17.0 chip-ID: 8086:06d7 rev: class-ID: 0104
Drives:
Local Storage: total: 981.12 GiB used: 295.9 GiB (30.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Intel model: HBRPEKNX0203AH
size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 15.8 Gb/s
lanes: 2 tech: SSD serial: <filter> fw-rev: HPS2 temp: 43.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:3 vendor: Intel model: HBRPEKNX0203AHO
size: 27.25 GiB block-size: physical: 512 B logical: 512 B speed: 15.8 Gb/s
lanes: 2 tech: SSD serial: <filter> fw-rev: HPS3 temp: 56.9 C scheme: MBR
Partition:
ID-1: / raw-size: 953.37 GiB size: 953.37 GiB (100.00%)
used: 295.82 GiB (31.0%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 511 MiB size: 510 MiB (99.80%)
used: 80.4 MiB (15.8%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 953.37 GiB size: 953.37 GiB (100.00%)
used: 295.82 GiB (31.0%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 953.37 GiB size: 953.37 GiB (100.00%)
used: 295.82 GiB (31.0%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 953.37 GiB size: 953.37 GiB (100.00%)
used: 295.82 GiB (31.0%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 15.24 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 58.0 C pch: 54.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 334 Uptime: 17m wakeups: 42729 Memory: available: 15.24 GiB
used: 3.1 GiB (20.3%) Init: systemd v: 253 default: graphical
tool: systemctl Compilers: gcc: 13.1.1 alt: 12 clang: 15.0.7 Packages:
pm: pacman pkgs: 1580 libs: 372 tools: octopi,paru,yay Shell: fish v: 3.6.1
default: Bash v: 5.1.16 running-in: konsole inxi: 3.3.27
Garuda (2.6.16-1):
System install date: 2023-03-22
Last full system update: 2023-05-25
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut nvidia-dkms
Windows dual boot: Probably (Run as root to verify)
Failed units:
Hello, this is my first time posting, though I've been trying garuda for a while. Despite the output above, I wiped my entire drive before installing garuda so there is no dual boot.
After I installed garuda, I noticed that almost every time I boot from the laptop being off, I would freeze on a black screen before the log in screen. Rarely does the laptop boot properly on the first run. Sometimes I have to reboot 3+ times in a row to get it to work. I've noticed that if I load from a snapshot it works right away, though I haven't confirmed this enough to determine if that's anecdotal. On the black screen the only thing it says is:
0.0822701__common_interrupt 0.100 No irq handler for vector
I've read about this and apparently if I update my bios it fixes this, maybe down the line I'll fix it but not a priority right now. If anyone had knowledge on the booting issue that would be very much appreciated.
system specs (neofetch):
Host: HP Spectre x360 Convertible 15t-eb000
Kernel: 6.3.4-zen1-1-zen
Packages: 1580 (pacman)
Shell: bash 5.1.16
Resolution: 2560x1440
DE: Plasma 5.27.5
WM: KWin
Theme: [Plasma], Breeze [GTK2], Sweet-Dark [GTK3]
Icons: [Plasma], BeautyLine [GTK2/3]
Terminal: konsole
Terminal Font: FiraCode Nerd Font Mono 12
CPU: Intel i7-10750H (12) @ 5.000GHz
GPU: Intel CometLake-H GT2 [UHD Graphics]
GPU: NVIDIA GeForce GTX 1650 Ti Mobile
Memory: 2748MiB / 15601MiB