Fingerprint Sensor not detected in lsusb

inxi
System:
Kernel: 5.15.18-1-lts x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-lts
root=UUID=6b9b1581-851d-48e8-aefd-50c43c9df285 rw [email protected]
quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=627ec95c-1cbb-46d5-b209-fc50f8eee503 loglevel=3
Desktop: KDE Plasma 5.23.5 tk: Qt 5.15.2 info: latte-dock wm: kwin_x11
vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Laptop System: ASUSTeK product: VivoBook_ASUSLaptop X513EAN_X513EA
v: 1.0 serial: <superuser required>
Mobo: ASUSTeK model: X513EAN v: 1.0 serial: <superuser required>
UEFI: American Megatrends LLC. v: X513EAN.201 date: 05/31/2021
Battery:
ID-1: BAT0 charge: 35.0 Wh (82.0%) condition: 42.7/42.1 Wh (101.5%)
volts: 11.8 min: 11.8 model: ASUSTeK ASUS Battery type: Li-ion serial: N/A
status: Charging
CPU:
Info: model: 11th Gen Intel Core i7-1165G7 bits: 64 type: MT MCP
arch: Tiger Lake family: 6 model-id: 0x8C (140) stepping: 1 microcode: 0x88
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 320 KiB desc: d-4x48 KiB; i-4x32 KiB L2: 5 MiB desc: 4x1.2 MiB
L3: 12 MiB desc: 1x12 MiB
Speed (MHz): avg: 1864 high: 3992 min/max: 400/4700 scaling:
driver: intel_pstate governor: powersave cores: 1: 1166 2: 841 3: 1403
4: 3989 5: 3992 6: 898 7: 1242 8: 1381 bogomips: 44851
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics] vendor: ASUSTeK
driver: i915 v: kernel bus-ID: 0000:00:02.0 chip-ID: 8086:9a49
class-ID: 0300
Device-2: IMC Networks USB2.0 HD UVC WebCam type: USB driver: uvcvideo
bus-ID: 1-6:3 chip-ID: 13d3:56a8 class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org 1.21.1.3 compositor: kwin_x11 driver:
loaded: intel unloaded: modesetting alternate: fbdev,vesa display-ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: eDP1 res: 1920x1080 hz: 60 dpi: 143
size: 340x190mm (13.4x7.5") diag: 389mm (15.3")
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
Device-1: Intel Tiger Lake-LP Smart Sound Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel alternate: snd_sof_pci_intel_tgl
bus-ID: 0000:00:1f.3 chip-ID: 8086:a0c8 class-ID: 0403
Sound Server-1: ALSA v: k5.15.18-1-lts running: yes
Sound Server-2: sndio v: N/A running: no
Sound Server-3: JACK v: 1.9.20 running: no
Sound Server-4: PulseAudio v: 15.0 running: no
Sound Server-5: PipeWire v: 0.3.44 running: yes
Network:
Device-1: MEDIATEK vendor: AzureWave driver: mt7921e v: kernel port: N/A
bus-ID: 0000:02:00.0 chip-ID: 14c3:7961 class-ID: 0280
IF: wlo1 state: up mac: <filter>
IF-ID-1: anbox0 state: down mac: <filter>
Bluetooth:
Device-1: IMC Networks Wireless_Device type: USB driver: btusb v: 0.8
bus-ID: 1-10:4 chip-ID: 13d3:3563 class-ID: e001 serial: <filter>
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
RAID:
Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd
v: 0.6 port: N/A bus-ID: 0000:00:0e.0 chip-ID: 8086:9a0b rev:
class-ID: 0104
Drives:
Local Storage: total: 476.94 GiB used: 16.79 GiB (3.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Intel model: SSDPEKNW512G8
size: 476.94 GiB block-size: physical: 512 B logical: 512 B
speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: 004C
temp: 30.9 C scheme: GPT
Partition:
ID-1: / raw-size: 467.84 GiB size: 467.84 GiB (100.00%)
used: 16.79 GiB (3.6%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 576 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 467.84 GiB size: 467.84 GiB (100.00%)
used: 16.79 GiB (3.6%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 467.84 GiB size: 467.84 GiB (100.00%)
used: 16.79 GiB (3.6%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 467.84 GiB size: 467.84 GiB (100.00%)
used: 16.79 GiB (3.6%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8.8 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:3
ID-2: swap-2 type: zram size: 7.45 GiB used: 5.5 MiB (0.1%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 50.0 C mobo: N/A
Fan Speeds (RPM): cpu: 3200
Info:
Processes: 262 Uptime: 27m wakeups: 1181 Memory: 7.45 GiB
used: 3.04 GiB (40.7%) Init: systemd v: 250 tool: systemctl Compilers:
gcc: 11.1.0 clang: 13.0.0 Packages: pacman: 1607 lib: 470 Shell: fish
v: 3.3.1 running-in: konsole inxi: 3.3.12
Garuda (2.5.3-1):
System install date:     2022-02-01
Last full system update: 2022-02-01
Is partially upgraded:   Yes
Relevant software:       NetworkManager
Windows dual boot:       No/Undetected
Snapshots:               Snapper
Failed units:            dev-binderfs.mount systemd-networkd-wait-online.service

Hello again. I'd like to use my fingerprint sensor on my laptop, but it doesn't show in lsusb. Here's my output of the command:

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 13d3:56a8 IMC Networks USB2.0 HD UVC WebCam
Bus 001 Device 004: ID 13d3:3563 IMC Networks Wireless_Device
Bus 001 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Is there a way to connect my sensor to linux?

Did you search in arch wiki if it work OOTB for this model?

1 Like

I got no results after searching on the arch wiki and forums

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.