Carrot garuda-inxi

Kernel: 5.17.1-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 11.2.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=9defb73e-3680-499e-89ec-10d7b12843a5 rw [email protected]
quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
systemd.unified_cgroup_hierarchy=1 amdgpu.ppfeaturemask=0xffffffff
resume=UUID=922b6371-e6a5-4c9a-beae-5a05f7ce4b41 loglevel=3
Console: pty pts/0 wm: kwin_x11 DM: SDDM Distro: Garuda Linux
base: Arch Linux
Type: Desktop Mobo: Gigabyte model: B450M S2H v: x.x serial: N/A
UEFI: American Megatrends v: F50 date: 11/27/2019
Info: model: AMD Ryzen 3 3100 socket: AM4 bits: 64 type: MT MCP arch: Zen 2
family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701013
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 2 MiB desc: 4x512 KiB
L3: 16 MiB desc: 2x8 MiB
Speed (MHz): avg: 2200 min/max: 2200/3906 boost: enabled
base/boost: 3600/3900 scaling: driver: acpi-cpufreq governor: ondemand
volts: 1.1 V ext-clock: 100 MHz cores: 1: 2200 2: 2200 3: 2200 4: 2200
5: 2200 6: 2200 7: 2200 8: 2200 bogomips: 57493
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Retpolines, IBPB: conditional, STIBP: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
vendor: Sapphire driver: amdgpu v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 16 ports: active: HDMI-A-2 empty: DP-1, DP-2, DVI-D-1, HDMI-A-1
bus-ID: 0a:00.0 chip-ID: 1002:67df class-ID: 0300
Display: server: X.Org v: compositor: kwin_x11 driver: X:
loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa gpu: amdgpu
display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
s-diag: 582mm (22.93")
Monitor-1: HDMI-A-2 mapped: HDMI-A-1 model: LG (GoldStar) FULL HD
serial: <filter> built: 2020 res: 1920x1080 hz: 60 dpi: 102 gamma: 1.2
size: 480x270mm (18.9x10.63") diag: 551mm (21.7") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
OpenGL: renderer: AMD Radeon RX 570 Series (polaris10 LLVM 13.0.1 DRM
3.44 5.17.1-zen1-1-zen)
v: 4.6 Mesa 22.0.0 direct render: Yes
Device-1: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
vendor: Sapphire driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 16 bus-ID: 0a:00.1 chip-ID: 1002:aaf0 class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0c:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: JMTek LLC. FANTECH CAPTAIN 7.1 type: USB
driver: hid-generic,snd-usb-audio,usbhid bus-ID: 3-1:2 chip-ID: 0c76:16cb
class-ID: 0300
Sound Server-1: ALSA v: k5.17.1-zen1-1-zen running: yes
Sound Server-2: PulseAudio v: 15.0 running: no
Sound Server-3: PipeWire v: 0.3.49 running: yes
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Gigabyte driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: f000 bus-ID: 09:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp9s0 state: up speed: 100 Mbps duplex: full mac: <filter>
IF-ID-1: anbox0 state: down mac: <filter>
IF-ID-2: docker0 state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-3: veth3f839ef state: up speed: 10000 Mbps duplex: full
mac: <filter>
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB
driver: btusb v: 0.8 bus-ID: 1-4.1:3 chip-ID: 0a12:0001 class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: N/A
Local Storage: total: 1.14 TiB used: 687.49 GiB (58.8%)
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: A-Data model: SX6000PNP
size: 238.47 GiB block-size: physical: 512 B logical: 512 B
speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: V9002s34
temp: 36.9 C scheme: GPT
SMART: yes health: PASSED on: 98d 23h cycles: 1,479
read-units: 41,130,208 [21.0 TB] written-units: 66,253,979 [33.9 TB]
ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000DM010-2EP102
family: BarraCuda 3.5 (CMR) size: 931.51 GiB block-size: physical: 4096 B
logical: 512 B sata: 3.0 speed: 6.0 Gb/s type: HDD rpm: 7200
serial: <filter> rev: CC43 temp: 31 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 1y 24d 22h cycles: 1443
read: 4.94 TiB written: 4.03 TiB Pre-Fail: attribute: Spin_Retry_Count
value: 100 worst: 100 threshold: 97
ID-1: / raw-size: 221.05 GiB size: 221.05 GiB (100.00%)
used: 158.61 GiB (71.8%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 576 KiB (0.2%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
maj-min: 259:1
ID-3: /home raw-size: 221.05 GiB size: 221.05 GiB (100.00%)
used: 158.61 GiB (71.8%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
maj-min: 259:2
ID-4: /var/log raw-size: 221.05 GiB size: 221.05 GiB (100.00%)
used: 158.61 GiB (71.8%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
maj-min: 259:2
ID-5: /var/tmp raw-size: 221.05 GiB size: 221.05 GiB (100.00%)
used: 158.61 GiB (71.8%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
maj-min: 259:2
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 17.13 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:3
ID-2: swap-2 type: zram size: 15.63 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
System Temperatures: cpu: 16.8 C mobo: N/A gpu: amdgpu temp: 46.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 1971
Processes: 346 Uptime: 2m wakeups: 0 Memory: 15.63 GiB
used: 3.56 GiB (22.8%) Init: systemd v: 250 tool: systemctl Compilers:
gcc: 11.2.0 clang: 13.0.1 Packages: pacman: 2012 lib: 574
Shell: garuda-inxi (sudo) default: Bash v: 5.1.16 running-in: konsole
inxi: 3.3.14
Garuda (2.5.8-1):
System install date:     2021-11-10
Last full system update: 2022-04-05
Is partially upgraded:   No
Relevant software:       NetworkManager
Windows dual boot:       No/Undetected
Snapshots:               Snapper
Failed units:            systemd-networkd-wait-online.service

Please update from inxi -Faz to garuda-inxi


can you change the title with "garuda-inxi" kindly?

1 Like

I,ve changed it


One note, you are in a partially upgraded state, you will want to run garuda-update sooner rather than later.

Edit: TilliDie got here first, removed changed

edit: sorry but how did you find out that? and it means i need to update this topic after every update i make?
there is a single package named flameshot,
it's current version is 11.xx but this version doesn't work well with my machine. i downgraded it with 10.xx
and thanks for garuda-update i was confused what is the proper command to upgrade my machine.

I had said I changed the subject, but TilliDie got here 4 minutes earlier, so I just removed the word changed after my page caught up.

Is towards the bottom of your garuda-inxi, and one of the things looked at when someone is requesting help, leading to the first suggestion to run upgrade before further troubleshooting. As you are aware of what is causing this, assessed any risk to your system, you only need to make sure while that program is downgraded that it isn't causing any future issue you might run into.

You are welcome, it took me a few days in the forums to figure that one out myself.


Use Try flameshot-git, work on all my hardware, check also the ini file.

cat .config/flameshot/flameshot.ini 
File: .config/flameshot/flameshot.ini
[email protected](\0\0\0\x7f\0\0\0\vQList<int>\0\0\0\0\x18\0\0\0\0\0\0\0\x1\0\0\0\x2\0\0\0\x3\0\0\0\x4\0\0\0\x5\

SGS gave you some information to try for your flameshot install above, SGS is good, so hopefully that helps.

I missed one of your questions earlier about changing this post. If you are going to ask for help, and it has been awhile since posting your garuda-inxi, then you might want to edit the output with the updated/current information to link. It is not required for every update you do though.


i tried git version once before, it didn't help, but this time: no problem. thanks


yep, he/she is a good entity. thank you too


This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.