Calamares not working on 210418 build of Garuda Sway

etrigan63 · 24 April 2021 02:34

I just tried to install the 0418 release of Garuda Sway on my well-supported laptop and got the following error:

 ╭─[email protected] in ~ took 5m33s
 ╰─λ sudo -E /usr/bin/calamares
QStandardPaths: runtime directory '/run/user/1000' is not owned by UID 0, but a directory permissions 0700 owned by UID 1000 GID 1000
QStandardPaths: runtime directory '/run/user/1000' is not owned by UID 0, but a directory permissions 0700 owned by UID 1000 GID 1000
16:54:25 [0]: propsReply "Method \"GetAll\" with signature \"s\" on interface \"org.freedesktop.DBus.Properties\" doesn't exist\n"
16:54:25 [0]: nmReply "Method \"GetDevices\" with signature \"\" on interface \"org.freedesktop.NetworkManager\" doesn't exist\n"
16:54:25 [0]: "Object path cannot be empty"
16:54:25 [1]: bool Calamares::ModuleManager::addModule(Calamares::Module*)
    ERROR: Module "[email protected]" loading FAILED.
16:54:25 [1]: void Calamares::ModuleManager::loadModules()
    ERROR: Module "[email protected]" exists but not loaded.
16:54:25 [1]: void CalamaresApplication::initFailed(const QStringList&)
    ERROR: STARTUP: failed modules are ("[email protected]", "[email protected]")
Authorization required, but no authorization protocol specified
Cannot open display ":0"

No installation.log was created.

Also, for some odd reason wireless networking is disabled. That happened on the previous build as well. It can be manually enabled.

tbg · 24 April 2021 02:46

Please post:

inxi -Fxxxza

What method did you use to burn your ISO, and did you checksum your download?

You can install with Calamares in offline mode if your internet connection is not working.

SGS · 24 April 2021 02:59

I just tried to install the 0418 release of Garuda Sway on my old PC (nvidia).
nvidia didn't work, free driver boot into desktop but I got only Blinking top bar, rest are black.
TTY2 garuda/garuda login failed, wrong passwd.

WTH ???

I did not check the sha, wait . Is ok.

etrigan63 · 24 April 2021 03:10

inxi output:
https://bin.garudalinux.org/?3df011f34e3c9679#BVZ43SfHbqx2risYP8VykVTG42mN1GiT4AoiDMVGbitX

I used balena etcher on Arcolinux to burn the ISO to a USB drive.

Calamares fails instantly. No opportunity to install. I would post a screenshot but that is verbotten.

etrigan63 · 24 April 2021 03:11

Yes. Apparently garuda/garuda is not used here. The same issue happens if the screen locks.

SGS · 24 April 2021 04:19

On very old AMD PC, no wallpaper, calamares open full screen.

inxi -Fxxxza
System:
  Kernel: 5.11.15-zen1-2-zen x86_64 bits: 64 compiler: gcc v: 10.2.0
  parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=de_DE keytable=de tz=Europe/Berlin
  misobasedir=garuda misolabel=GARUDA_SWAY_SOARING_ quiet systemd.show_status=1
  systemd.unified_cgroup_hierarchy=1 driver=free nouveau.modeset=1 i915.modeset=1
  radeon.modeset=1
  Desktop: sway 1.6 vt: 1 dm: N/A Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: MEDIONPC model: MS-7501 v: 3.1 serial: <filter>
  BIOS: American Megatrends v: A7501MLN.30E date: 04/28/2009
CPU:
  Info: Quad Core model: AMD Phenom 9650 bits: 64 type: MCP arch: K10 family: 10 (16)
  model-id: 2 stepping: 3 microcode: 1000095 cache: L2: 2 MiB
  flags: lm nx pae sse sse2 sse3 sse4a svm bogomips: 18360
  Speed: 2300 MHz min/max: 1150/2300 MHz Core speeds (MHz): 1: 2300 2: 2300 3: 2300
  4: 2300
  Vulnerabilities: Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Not affected
  Type: spectre_v1
  mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Full AMD retpoline, STIBP: disabled, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD RV710 [Radeon HD 4550] vendor: PC Partner Limited driver: radeon
  v: kernel bus-ID: 01:00.0 chip-ID: 1002:9540 class-ID: 0300
  Display: wayland server: X.Org 1.21.1.1 compositor: sway v: 1.6 driver:
  loaded: radeon note: n/a (using device driver) display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1200 s-dpi: 96 s-size: 508x318mm (20.0x12.5")
  s-diag: 599mm (23.6")
  OpenGL: renderer: AMD RV710 (DRM 2.50.0 / 5.11.15-zen1-2-zen LLVM 11.1.0)
  v: 3.3 Mesa 21.0.3 compat-v: 3.0 direct render: Yes
Audio:
  Device-1: AMD SBx00 Azalia vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
  bus-ID: 00:14.2 chip-ID: 1002:4383 class-ID: 0403
  Device-2: AMD RV710/730 HDMI Audio [Radeon HD 4000 series]
  vendor: PC Partner Limited driver: snd_hda_intel v: kernel bus-ID: 01:00.1
  chip-ID: 1002:aa38 class-ID: 0403
  Sound Server-1: ALSA v: k5.11.15-zen1-2-zen running: yes
  Sound Server-2: sndio v: N/A running: no
  Sound Server-3: JACK v: 0.125.0 running: no
  Sound Server-4: PulseAudio v: 14.2 running: yes
  Sound Server-5: PipeWire v: 0.3.25 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
  vendor: Micro-Star MSI driver: r8169 v: kernel port: e800 bus-ID: 02:00.0
  chip-ID: 10ec:8168 class-ID: 0200
  IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-2: IMC Networks AW-NU222 802.11bgn Wireless Module [Ralink RT2770+RT2720]
  type: USB driver: rt2800usb bus-ID: 2-4:4 chip-ID: 13d3:3247 class-ID: 0000
  serial: <filter>
  IF: wlan0 state: down mac: <filter>
Drives:
  Local Storage: total: 1.5 TiB used: 0 KiB (0.0%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD6400AACS-00G8B1
  size: 596.17 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
  serial: <filter> rev: 4C05 scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 vendor: Hitachi model: HDT721010SLA360 size: 931.51 GiB
  block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s rotation: 7200 rpm
  serial: <filter> rev: A31B scheme: MBR
  ID-3: /dev/sdf maj-min: 8:80 type: USB model: UDISK PDU01 8G 98I2.0 size: 7.22 GiB
  block-size: physical: 512 B logical: 512 B speed: <unknown> serial: <filter>
  rev: 0.00 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Swap:
  Kernel: swappiness: 10 (default 60) cache-pressure: 75 (default 100)
  ID-1: swap-1 type: zram size: 981.5 MiB used: 478.6 MiB (48.8%) priority: 32767
  dev: /dev/zram0
  ID-2: swap-2 type: zram size: 981.5 MiB used: 479.3 MiB (48.8%) priority: 32767
  dev: /dev/zram1
  ID-3: swap-3 type: zram size: 981.5 MiB used: 477.4 MiB (48.6%) priority: 32767
  dev: /dev/zram2
  ID-4: swap-4 type: zram size: 981.5 MiB used: 478 MiB (48.7%) priority: 32767
  dev: /dev/zram3
Sensors:
  Message: No sensor data found. Is lm-sensors configured?
Info:
  Processes: 207 Uptime: 17m wakeups: 0 Memory: 3.83 GiB used: 3.03 GiB (79.1%)
  Init: systemd v: 248 tool: systemctl Compilers: gcc: 10.2.0 clang: 11.1.0 Packages:
  pacman: 1187 lib: 294 Shell: fish v: 3.2.1 default: Bash v: 5.1.4
  running-in: alacritty inxi: 3.3.04

sudo -E calamares -d
QStandardPaths: runtime directory '/run/user/1000' is not owned by UID 0, but a directory permissions 0700 owned by UID 1000 GID 1000
QStandardPaths: runtime directory '/run/user/1000' is not owned by UID 0, but a directory permissions 0700 owned by UID 1000 GID 1000
06:10:39 [6]: Calamares::Settings::Settings(const QString&, bool)
    Using Calamares settings file at "/etc/calamares/settings.conf"
WARNING:     ..  Required settings.conf key hide-back-and-next-during-exec is missing.
06:10:39 [6]: void Logger::setupLogfile()
    Using log file: "/home/garuda/.cache/calamares/session.log"
06:10:39 [6]: void CalamaresApplication::init()
    Calamares version: 3.2.39.3-2.3
    ..  languages: "ar, as, ast, az, az_AZ, be, bg, bn, ca, [email protected], cs_CZ, da, de, el, en, en_GB, eo, es, es_MX, es_PR, et, eu, fa, fi_FI, fr, fur, gl, he, hi, hr, hu, id, is, it_IT, ja, ko, lt, ml, mr, nb, nl, pl, pt_BR, pt_PT, ro, ru, sk, sl, sq, sr, [email protected], sv, tg, th, tr_TR, uk, vi, zh_CN, zh_TW"
06:10:39 [6]: bool CalamaresUtils::initQmlModulesDir()
    Using Calamares QML directory "/usr/share/calamares/qml"
06:10:39 [6]: Calamares::Branding::Branding(const QString&, QObject*)
    Using Calamares branding file at "/usr/share/calamares/branding/garuda/branding.desc"
06:10:39 [2]: void Calamares::flavorAndSide(const YAML::Node&, const char*, Calamares::Branding::PanelFlavor&, Calamares::Branding::PanelSide&)
    WARNING: Branding setting for sidebar is missing, using "widget" "left"
06:10:39 [2]: void Calamares::flavorAndSide(const YAML::Node&, const char*, Calamares::Branding::PanelFlavor&, Calamares::Branding::PanelSide&)
    WARNING: Branding setting for navigation is missing, using "widget" "bottom"
06:10:39 [2]: Calamares::Branding::Branding(const QString&, QObject*)
    WARNING: the branding component "/usr/share/calamares/branding/garuda" does not ship translations.
06:10:39 [6]: Calamares::Branding::Branding(const QString&, QObject*)
    Loaded branding component "garuda"
    ..  No translation for "tz_" "de_DE" using default (en)
    ..  Loaded QRC translation "calamares_" "de_DE"
    ..  STARTUP: initSettings, initQmlPath, initBranding done
    ..  STARTUP: initModuleManager: module init started
06:10:39 [6]: void Calamares::ModuleManager::doInit()
    Found 49 modules
06:10:39 [6]: void CalamaresApplication::initView()
    STARTUP: initModuleManager: all modules init done
06:10:39 [6]: void CalamaresApplication::initView()
    STARTUP: initJobQueue done
06:10:39 [6]: CalamaresWindow::CalamaresWindow(QWidget*)
    Available desktop QSize(1920, 1200) minimum size QSize(1024, 520)
    ..  Proposed window size: 1024 600
06:10:39 [2]: QString Calamares::_stylesheet(const QDir&)
    WARNING: The branding component "/usr/share/calamares/branding/garuda" does not ship stylesheet.qss.
06:10:39 [6]: void CalamaresApplication::initView()
    STARTUP: CalamaresWindow created; loadModules started
06:10:40 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/etc/calamares/modules/welcome.conf"
06:10:40 [6]: void Config::initLanguages()
    Matching locale QLocale(German, Latin, Germany)
    ..  Matched with index 12 "de_DE"
    ..  No translation for "tz_" "de_DE" using default (en)
    ..  Loaded QRC translation "calamares_" "de_DE"
06:10:40 [6]: void Config::setLocaleIndex(int)
    Index 12 Selected locale QLocale(German, Latin, Germany)
    ..  No translation for "tz_" "de_DE" using default (en)
    ..  Loaded QRC translation "calamares_" "de_DE"
06:10:40 [0]: propsReply "Method \"GetAll\" with signature \"s\" on interface \"org.freedesktop.DBus.Properties\" doesn't exist\n"
06:10:40 [0]: nmReply "Method \"GetDevices\" with signature \"\" on interface \"org.freedesktop.NetworkManager\" doesn't exist\n"
06:10:40 [0]: "Object path cannot be empty"
06:10:40 [8]: "Not supported"
06:10:40 [6]: QPair<CalamaresUtils::Network::RequestStatus, QNetworkReply*> CalamaresUtils::Network::synchronousRun(QNetworkAccessManager*, const QUrl&, const CalamaresUtils::Network::RequestOptions&)
    HTTP error QNetworkReply::ConnectionRefusedError on request for QUrl("https://ipapi.co/json")
06:10:40 [2]: virtual QString CalamaresUtils::GeoIP::GeoIPJSON::rawReply(const QByteArray&)
    WARNING: Invalid YAML data for GeoIPJSON
06:10:42 [6]: virtual void Calamares::ViewModule::loadSelf()
    ViewModule "[email protected]" loading complete.
06:10:42 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/etc/calamares/modules/locale.conf"
06:10:42 [6]: virtual void Calamares::ViewModule::loadSelf()
    ViewModule "[email protected]" loading complete.
06:10:42 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/usr/share/calamares/modules/keyboard.conf"
06:10:42 [6]: KeyboardModelsModel::KeyboardModelsModel(QObject*)
    Loaded 188 keyboard models
06:10:42 [6]: KeyboardPage::KeyboardPage(Config*, QWidget*)
    Variants now 0 -1
06:10:43 [6]: virtual void Calamares::ViewModule::loadSelf()
    ViewModule "[email protected]" loading complete.
06:10:43 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/usr/share/calamares/modules/partition.conf"
06:10:43 [6]: CalamaresUtils::Partition::InternalManager::InternalManager()
    KPMCore backend starting ..
06:10:43 [8]: Loaded backend plugin:  "pmsfdiskbackendplugin"
    ..  Backend @0x561300ffd170 "pmsfdiskbackendplugin" "1"
06:10:43 [6]: CalamaresUtils::Partition::KPMManager::KPMManager()
    KPMManager 1 created.
06:10:43 [6]: virtual void PartitionViewStep::setConfigurationMap(const QVariantMap&)
    Setting firmwareType to "bios"
06:10:43 [6]: QString PartUtils::findFS(QString, FileSystem::Type*)
    Found filesystem "ext4"
06:10:43 [6]: virtual void PartitionViewStep::setConfigurationMap(const QVariantMap&)
    Partition-module setting *defaultFileSystemType* "ext4"
06:10:43 [2]: virtual void PartitionViewStep::setConfigurationMap(const QVariantMap&)
    WARNING: Partition-module setting *defaultPartitionTableType* is unset, will use gpt for efi or msdos for bios
06:10:43 [6]: virtual void Calamares::ViewModule::loadSelf()
    ViewModule "[email protected]" loading complete.
06:10:43 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/etc/calamares/modules/users.conf"
06:10:43 [6]: virtual void Calamares::ViewModule::loadSelf()
    ViewModule "[email protected]" loading complete.
06:10:43 [6]: virtual void Calamares::ViewModule::loadSelf()
    ViewModule "[email protected]" loading complete.
06:10:43 [6]: void Calamares::ModuleManager::loadModules()
    Module "[email protected]" already loaded.
06:10:47 [6]: Calamares::SlideshowQML::SlideshowQML(QWidget*)
    QML import paths:
     "/usr/share/calamares/qml"
     "/usr/bin"
     "qrc:/qt-project.org/imports"
     "/usr/lib/qt/qml"
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/usr/share/calamares/modules/mount.conf"
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/etc/calamares/modules/unpackfs.conf"
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/etc/calamares/modules/machineid.conf"
06:10:47 [2]: virtual void MachineIdJob::setConfigurationMap(const QVariantMap&)
    WARNING: MachineId: configuration setting *symlink* is deprecated, use *dbus-symlink*.
06:10:47 [6]: virtual void Calamares::CppJobModule::loadSelf()
    CppJobModule "[email protected]" loading complete.
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/usr/share/calamares/modules/fstab.conf"
06:10:47 [6]: void Calamares::ModuleManager::loadModules()
    Module "[email protected]" already loaded.
06:10:47 [6]: void Calamares::ModuleManager::loadModules()
    Module "[email protected]" already loaded.
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/usr/share/calamares/modules/luksopenswaphookcfg.conf"
06:10:47 [6]: virtual void Calamares::CppJobModule::loadSelf()
    CppJobModule "[email protected]" loading complete.
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/etc/calamares/modules/plymouthcfg.conf"
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    No config file for "initcpiocfg" found anywhere at
     "/home/garuda/src/modules/initcpiocfg/initcpiocfg.conf"
     "/etc/calamares/modules/initcpiocfg.conf"
     "/usr/share/calamares/modules/initcpiocfg.conf"
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/etc/calamares/modules/initcpio.conf"
06:10:47 [6]: virtual void Calamares::CppJobModule::loadSelf()
    CppJobModule "[email protected]" loading complete.
06:10:47 [6]: void Calamares::ModuleManager::loadModules()
    Module "[email protected]" already loaded.
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/etc/calamares/modules/displaymanager.conf"
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/etc/calamares/modules/mhwdcfg.conf"
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/etc/calamares/modules/services.conf"
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/usr/share/calamares/modules/grubcfg.conf"
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/etc/calamares/modules/bootloader.conf"
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/etc/calamares/modules/postcfg.conf"
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/usr/share/calamares/modules/umount.conf"
06:10:47 [6]: void Calamares::Module::loadConfigurationFile(const QString&)
    Loaded module configuration "/etc/calamares/modules/finished.conf"
06:10:47 [2]: void Config::setConfigurationMap(const QVariantMap&)
    WARNING: Configuring the finished module with deprecated restartNowEnabled settings
06:10:47 [6]: virtual void Calamares::ViewModule::loadSelf()
    ViewModule "[email protected]" loading complete.
06:10:47 [6]: setGeoIP(Config*, const QVariantMap&)::<lambda()>
    GeoIP result for welcome= ""
06:10:47 [6]: void setCountry(Config*, const QString&, CalamaresUtils::GeoIP::Handler*)
    Unusable country code ""
    ..  Obtained from "https://ipapi.co/json"  ( 1 "country" )
Authorization required, but no authorization protocol specified
Cannot open display ":0"
06:10:47 [6]: Config::Config(QObject*)::<lambda(int)>::<lambda()>
    xkbmap selection changed to:  "af" - ""
06:10:47 [6]: void CalamaresApplication::initViewSteps()
    STARTUP: loadModules for all modules done
06:10:47 [6]: void Calamares::ModuleManager::checkRequirements()
    Checking module requirements ..
06:10:48 [6]: void CalamaresApplication::initViewSteps()
    STARTUP: Window now visible and ProgressTreeView populated
    ..  8 view steps loaded.
    ..  No translation for "kb_" "de_DE" using default (en)
fish: Job 1, 'sudo -E calamares -d' terminated by signal SIGBUS (Fehler: nicht ausgerichtete Adresse)

sudo -E calamares
QStandardPaths: runtime directory '/run/user/1000' is not owned by UID 0, but a directory permissions 0700 owned by UID 1000 GID 1000
QStandardPaths: runtime directory '/run/user/1000' is not owned by UID 0, but a directory permissions 0700 owned by UID 1000 GID 1000
06:12:05 [0]: propsReply "Method \"GetAll\" with signature \"s\" on interface \"org.freedesktop.DBus.Properties\" doesn't exist\n"
06:12:05 [0]: nmReply "Method \"GetDevices\" with signature \"\" on interface \"org.freedesktop.NetworkManager\" doesn't exist\n"
06:12:05 [0]: "Object path cannot be empty"
Authorization required, but no authorization protocol specified
Cannot open display ":0"
fish: Job 1, 'sudo -E calamares' terminated by signal SIGBUS (Fehler: nicht ausgerichtete Adresse)

Screenshot as alibi

etrigan63 · 24 April 2021 05:23

Matches exactly with my experience.

OdiousImp · 24 April 2021 11:20

Any idea what the problem is? I know nothing about calamares. @librewish changed something on gitlab in the Iso-Profiles could that have solved it?

etrigan63 · 24 April 2021 14:27

From what I can see, he took my suggestion about not using fish as a login shell since it is not POSIX-compliant. Maybe try a new build with those changes?

SGS · 24 April 2021 14:36

etrigan63 · 24 April 2021 14:49

Downloading now.

etrigan63 · 24 April 2021 15:19

Calamares worked as expected. Wireless is still disabled by default, but that is another issue.

OdiousImp · 24 April 2021 21:10

Thank you a lot for testing btw! It is very appreciated and very useful!

system · 26 April 2021 21:11

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.