I just installed Garuda Hyperland on my laptop, but the top bar is buggy and not compatible with my laptop, which causes several menus to be hidden from my view. Please help me on how to fix this.
System:
Kernel: 6.15.8-zen1-2-zen arch: x86_64 bits: 64
compiler: gcc v: 15.1.1 clocksource: tsc
avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=dad7fbf2-a347-4ea3-ae0a-53aa336133f4
rw rootflags=subvol=@ quiet
resume=UUID=1a66aaea-648c-4814-b3c7-717409a4b05e
loglevel=3 ibt=off
Desktop: Hyprland v: 0.50.1 with: waybar
tools: hypridle avail: hyprlock vt: 1 dm: SDDM
Distro: Garuda base: Arch Linux
Machine:
Type: Laptop System: LENOVO product: 81D0
v: Lenovo ideapad 330-14IGM
serial: <superuser required> Chassis:
type: 10 v: Lenovo ideapad 330-14IGM
serial: <superuser required>
Mobo: LENOVO model: LNVNB161216
v: SDK0Q55731 WIN serial: <superuser required>
part-nu: LENOVO_MT_81D0_BU_idea_FM_ideapad 330-14IGM
uuid: <superuser required> UEFI: LENOVO
v: 7XCN41WW date: 06/17/2021
Battery:
ID-1: BAT0 charge: 20.3 Wh (100.0%)
condition: 20.3/30.0 Wh (67.6%) volts: 8.4
min: 7.6 model: LGC L17L2PF1 type: Li-poly
serial: <filter> status: full
CPU:
Info: model: Intel Celeron N4100 bits: 64
type: MCP arch: Goldmont Plus level: v2
built: 2017 process: Intel 14nm family: 6
model-id: 0x7A (122) stepping: 1
microcode: 0x42
Topology: cpus: 1x dies: 1 clusters: 1
cores: 4 smt: <unsupported> cache: L1: 224 KiB
desc: d-4x24 KiB; i-4x32 KiB L2: 4 MiB
desc: 1x4 MiB
Speed (MHz): avg: 2312 min/max: 800/2400
scaling: driver: intel_cpufreq
governor: schedutil cores: 1: 2312 2: 2312
3: 2312 4: 2312 bogomips: 8755
Flags: ht lm nx pae sse sse2 sse3 sse4_1
sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel GeminiLake [UHD Graphics 600]
vendor: Lenovo driver: i915 v: kernel
arch: Gen-9.5 process: Intel 14nm
built: 2016-20 ports: active: eDP-1
empty: HDMI-A-1 bus-ID: 00:02.0
chip-ID: 8086:3185 class-ID: 0300
Device-2: Chicony EasyCamera driver: uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1
mode: 2.0 bus-ID: 1-7:4 chip-ID: 04f2:b5d7
class-ID: 0e02 serial: <filter>
Display: wayland server: X.org v: 1.21.1.18
with: Xwayland v: 24.1.8 compositor: Hyprland
v: 0.50.1 driver: X: loaded: modesetting
alternate: fbdev,intel,vesa dri: iris
gpu: i915 display-ID: 1
Monitor-1: eDP-1 model: BOE Display 0x06bd
built: 2016 res: mode: 1366x768 hz: 60
scale: 100% (1) dpi: 112 gamma: 1.2
size: 309x173mm (12.17x6.81")
diag: 354mm (13.9") ratio: 16:9
modes: 1366x768
API: EGL Message: EGL data requires eglinfo.
Check --recommends.
Info: Tools: wl: kanshi, wdisplays, wlr-randr
x11: xprop
Audio:
Device-1: Intel Celeron/Pentium Silver
Processor High Definition Audio
vendor: Lenovo driver: snd_hda_intel
v: kernel
alternate: snd_soc_avs,snd_sof_pci_intel_apl
bus-ID: 00:0e.0 chip-ID: 8086:3198
class-ID: 0403
API: ALSA v: k6.15.8-zen1-2-zen
status: kernel-api
tools: alsactl,alsamixer,amixer
Server-1: sndiod v: N/A status: off
tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 1.4.7 status: active
with: 1: pipewire-pulse status: active
2: wireplumber status: active
3: pipewire-alsa type: plugin 4: pw-jack
type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL810xE PCI Express Fast
Ethernet vendor: Lenovo driver: r8169
v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: 1000 bus-ID: 01:00.0
chip-ID: 10ec:8136 class-ID: 0200
IF: enp1s0 state: down mac: <filter>
Device-2: Qualcomm Atheros QCA9377 802.11ac
Wireless Network Adapter vendor: Lenovo
driver: ath10k_pci v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0
chip-ID: 168c:0042 class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
Info: services: NetworkManager,
systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: Qualcomm Atheros driver: btusb v: 0.8
type: USB rev: 2.0 speed: 12 Mb/s lanes: 1
mode: 1.1 bus-ID: 1-8:5 chip-ID: 0cf3:e500
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 2 state: down
bt-service: enabled,running rfk-block:
hardware: no software: yes address: N/A
Drives:
Local Storage: total: 469.51 GiB
used: 6.38 GiB (1.4%)
SMART Message: Required tool smartctl not
installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0
vendor: Western Digital
model: WD5000LPCX-24VHAT0 size: 465.76 GiB
block-size: physical: 4096 B logical: 512 B
speed: 6.0 Gb/s tech: HDD rpm: 5400
serial: <filter> fw-rev: 1A02 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: SanDisk
model: Cruzer Slice size: 3.75 GiB block-size:
physical: 512 B logical: 512 B type: USB
rev: 2.0 spd: 480 Mb/s lanes: 1 mode: 2.0
tech: N/A serial: <filter> fw-rev: 8.02
scheme: MBR
Partition:
ID-1: / raw-size: 40 GiB size: 40 GiB (100.00%)
used: 6.24 GiB (15.6%) fs: btrfs dev: /dev/sda6
maj-min: 8:6
ID-2: /boot/efi raw-size: 260 MiB
size: 256 MiB (98.46%) used: 34.5 MiB (13.5%)
fs: vfat dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 66 GiB
size: 66 GiB (100.00%) used: 111.9 MiB (0.2%)
fs: btrfs dev: /dev/sda8 maj-min: 8:8
ID-4: /var/log raw-size: 40 GiB
size: 40 GiB (100.00%) used: 6.24 GiB (15.6%)
fs: btrfs dev: /dev/sda6 maj-min: 8:6
ID-5: /var/tmp raw-size: 40 GiB
size: 40 GiB (100.00%) used: 6.24 GiB (15.6%)
fs: btrfs dev: /dev/sda6 maj-min: 8:6
Swap:
Kernel: swappiness: 133 (default 60)
cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 3.64 GiB
used: 96.4 MiB (2.6%) priority: 100 comp: zstd
avail: lzo-rle,lzo,lz4,lz4hc,deflate,842
dev: /dev/zram0
ID-2: swap-2 type: partition size: 4 GiB
used: 0 KiB (0.0%) priority: -2 dev: /dev/sda7
maj-min: 8:7
Sensors:
System Temperatures: cpu: 50.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 4 GiB available: 3.64 GiB
used: 1.98 GiB (54.4%)
Processes: 246 Power: uptime: 51m
states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform
avail: shutdown, reboot, suspend,
test_resume image: 1.44 GiB services: upowerd
Init: systemd v: 257 default: graphical
tool: systemctl
Packages: pm: pacman pkgs: 1142 libs: 314
tools: pacseek,paru Compilers: gcc: 15.1.1
Shell: Bash v: 5.3.3 default: fish v: 4.0.2
running-in: foot inxi: 3.3.38
Garuda (2.7.5-1):
System install date: 2025-08-12
Last full system update: 2025-08-12 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: Probably (Run as root to verify)
Failed units:
--- System Health Check Report ---
20/21 checks run in 3.10 seconds ⌛
Powered by garuda-health 🦅
--- INFO ---
- A reboot is pending (update applied since last reboot)
