Please, just post you garuda-inxi from live ISO.
1 Like
I did, should've highlighted it : /
https://termbin.com/brnq
System:
Kernel: 6.2.13-zen-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC misobasedir=garuda
root=miso:LABEL=GARUDA_DR460NIZEDGAMING_RAPTOR quiet systemd.show_status=1 ibt=off
driver=nonfree nouveau.modeset=0 i915.modeset=1 radeon.modeset=1
Console: N/A Distro: Garuda Linux base: Arch Linux
Machine:
Type: Laptop System: ASUSTeK product: ROG Strix G513IC_G513IC v: 1.0 serial: <filter>
Mobo: ASUSTeK model: G513IC v: 1.0 serial: <filter> UEFI: American Megatrends LLC.
v: G513IC.329 date: 03/01/2023
Battery:
ID-1: BAT0 charge: 50.7 Wh (100.0%) condition: 50.7/56.0 Wh (90.6%) volts: 17.4 min: 15.9
model: AS3GWZC3KC G513-36 type: Li-ion serial: <filter> status: full
CPU:
Info: model: AMD Ryzen 7 4800H with Radeon Graphics socket: FP6 bits: 64 type: MT MCP arch: Zen 2
gen: 3 level: v3 note: check built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23)
model-id: 0x60 (96) stepping: 1 microcode: 0x8600106
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 8 MiB desc: 2x4 MiB
Speed (MHz): avg: 2900 min/max: 1400/4299 boost: enabled base/boost: 2900/4300 scaling:
driver: acpi-cpufreq governor: performance volts: 1.2 V ext-clock: 100 MHz cores: 1: 2900 2: 2900
3: 2900 4: 2900 5: 2900 6: 2900 7: 2900 8: 2900 9: 2900 10: 2900 11: 2900 12: 2900 13: 2900
14: 2900 15: 2900 16: 2900 bogomips: 92628
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA GA107M [GeForce RTX 3050 Mobile] vendor: ASUSTeK driver: N/A alternate: nouveau
non-free: 530.xx+ status: current (as of 2023-05) arch: Ampere code: GAxxx process: TSMC n7 (7nm)
built: 2020-22 pcie: gen: 3 speed: 8 GT/s lanes: 8 link-max: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 01:00.0 chip-ID: 10de:25a5 class-ID: 0300
Device-2: AMD Renoir vendor: ASUSTeK driver: amdgpu v: kernel arch: GCN-5 code: Vega
process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 05:00.0 chip-ID: 1002:1636
class-ID: 0300 temp: 51.0 C
Display: server: X.org v: 1.21.1.8 with: Xwayland v: 23.1.1 compositor: kwin_x11 driver:
gpu: amdgpu tty: 80x40
Monitor-1: eDP-1 model: BOE Display 0x090f built: 2020 res: 1920x1080 dpi: 142 gamma: 1.2
size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9 modes: max: 1920x1080 min: 640x480
API: OpenGL Message: GL data unavailable in console for root.
Audio:
Device-1: NVIDIA vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 8 link-max: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:2291
class-ID: 0403
Device-2: AMD Renoir Radeon High Definition Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.1
chip-ID: 1002:1637 class-ID: 0403
Device-3: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: ASUSTeK driver: N/A
alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x, snd_acp_pci,
snd_rpl_pci_acp6x, snd_pci_ps, snd_sof_amd_renoir, snd_sof_amd_rembrandt pcie: gen: 3
speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.5 chip-ID: 1022:15e2
class-ID: 0480
Device-4: AMD Family 17h/19h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie:
gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.6 chip-ID: 1022:15e3
class-ID: 0403
API: ALSA v: k6.2.13-zen-1-zen status: kernel-api with: aoss type: oss-emulator tools: N/A
Server-1: PipeWire v: 0.3.71 status: n/a (root, process) with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK driver: r8169
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: enp2s0 state: down mac: <filter>
Device-2: MEDIATEK MT7921 802.11ax PCI Express Wireless Network Adapter vendor: AzureWave
driver: mt7921e v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 14c3:7961
class-ID: 0280
IF: wlp3s0 state: up mac: <filter>
Bluetooth:
Device-1: IMC Networks Wireless_Device driver: btusb v: 0.8 type: USB rev: 2.1 speed: 480 Mb/s
lanes: 1 mode: 2.0 bus-ID: 3-4:4 chip-ID: 13d3:3563 class-ID: e001 serial: <filter>
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: N/A
Drives:
Local Storage: total: 506.76 GiB used: 14.99 GiB (3.0%)
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Intel model: SSDPEKNU512GZ size: 476.94 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 002C temp: 31.9 C
SMART: yes health: PASSED on: 118d 13h cycles: 2,982 read-units: 39,987,541 [20.4 TB]
written-units: 24,602,829 [12.5 TB]
ID-2: /dev/sda maj-min: 8:0 vendor: SanDisk model: Cruzer Blade size: 29.82 GiB block-size:
physical: 512 B logical: 512 B type: USB rev: 2.0 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: N/A
serial: <filter> fw-rev: 1.27
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 238.47 GiB size: 238.47 GiB (100.00%) used: 14.97 GiB (6.3%) fs: btrfs
block-size: 4096 B dev: /dev/nvme0n1p5 maj-min: 259:5
ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 25.6 MiB (26.6%) fs: vfat
block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 238.47 GiB size: 238.47 GiB (100.00%) used: 14.97 GiB (6.3%) fs: btrfs
block-size: 4096 B dev: /dev/nvme0n1p5 maj-min: 259:5
ID-4: /var/log raw-size: 238.47 GiB size: 238.47 GiB (100.00%) used: 14.97 GiB (6.3%) fs: btrfs
block-size: 4096 B dev: /dev/nvme0n1p5 maj-min: 259:5
ID-5: /var/tmp raw-size: 238.47 GiB size: 238.47 GiB (100.00%) used: 14.97 GiB (6.3%) fs: btrfs
block-size: 4096 B dev: /dev/nvme0n1p5 maj-min: 259:5
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 15.05 GiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 68.5 C mobo: N/A gpu: amdgpu temp: 51.0 C
Fan Speeds (RPM): cpu: 1900
Info:
Processes: 360 Uptime: 38m wakeups: 4 Memory: available: 15.05 GiB used: 3.34 GiB (22.2%)
Init: systemd v: 253 default: graphical tool: systemctl Compilers: gcc: 13.1.1 Packages:
pm: pacman pkgs: 1790 libs: 517 tools: octopi,paru Client: inxi: 3.3.27
Garuda (2.6.16-1):
System install date: 2023-06-04
Last full system update: 2023-06-04
Is partially upgraded: No
Relevant software: snapper NetworkManager connman dracut
Windows dual boot: No/Undetected
Failed units:
Boot from live ISO grub with free driver, search in forum about dual GPU in Notebooks.
2 Likes
I've been waiting for 3 hours for it to boot. I had a movie to watch but now I realized that ain't right. I prepared the flash with balena etcher again and booted again if it matters. I also deleted the already installed Garuda while the USB was getting ready.
Last three lines are:
Starting Cleanup of Temporary Directories
[ Ok ] Finished Cleanup of Temporary Directories
[*** ] A start job is running for automatic driver installation via MHWD (be patient!) (39min 17s / no limit)
retry a clean install with Ventoy.net
3 Likes
What partition style should I choose? Its set to NTFS MBR default. I guess FAT32 and GPT?
4 Likes
I read and followed that in first place. It used garuda downloader which didn't work then as it doesn't now. Log file:
Info: "zsync2 version 2.0.0-alpha-1 (commit aa5d024), build <local dev build> built on 2021-03-25 10:51:00 UTC"
Info: "Could not resolve host: mirrors.fossho.st"
Info: "Reading and/or parsing .zsync file failed!"
Could it be something about my pc? Or even country (Turkey btw).
That's a known issue right now.
5 Likes
Nope. 1hours past with ventoy usb on open source drivers. Tried many configurations. Searched for my case with dual GPU's and lastly tried with Oracle virtual box which worked very well! I have no idea about why it worked directly from the iso but not with USB. I even ran far cry primal on virtual machine.
You said garuda installer problem I have is known. Is there an ETA for when it will be fixed? For now I will try with another USB.
No, the app programmer will fix it as soon as he can.
A troubleshooting was already initiated by a team member, but this unfortunately failed.
We ask for your patience.
3 Likes
Wait, I got to see Garuda opening acreen! Tho it's frozen. I was able to press esc fast enough to read some of the last actions. I saw something abou TCS, clock thing and "broken bios". Sadly I am unable to get back to that textual output. If I get lucy again I will edit this with proper information.
İnstead of gaming edition, I simply downloaded standart dragonized edition and instaleld stuff on it afterwards. Problem was with gaming edition as I learnt from my experiences.
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.