BeautyLine update error: “gtk-update-icon-cache: The generated cache was invalid”

Hey everyone,

After updating today with paru -Syu, I got this message:

(4/9) Foreign/AUR package notification
gestures 0.3.1-3
gtk-engine-murrine 0.98.2-4
gtk2 2.24.33-5
libinput-gestures 2.80-1.1
nwg-launchers 0.7.1.1-1
(5/9) Orphaned package notification...
libinstpatch 1.1.7-2
nlohmann-json 3.12.0-2
(6/9) Checking for .pacnew and .pacsave files...
(7/9) Updating icon theme caches...
gtk-update-icon-cache: The generated cache was invalid.
error: command failed to execute correctly
(8/9) Performing snapper post snapshots for the following configurations...
==> root: 47

It showed up right after beautyline was upgraded to version 1:20251102-1.
The system works fine otherwise, but I’m wondering if this is just a harmless cache issue or something broken in the theme package.

Also, I noticed some AUR and orphaned packages listed after the upgrade. I didn’t install them manually — are they safe to remove?

Thanks!

System:
  Kernel: 6.17.6-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 15.2.1 clocksource: tsc
    avail: hpet,acpi_pm parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=5554d7f0-5875-4993-b56d-12bb2fb29834 rw rootflags=subvol=@ quiet loglevel=3
  Desktop: Hyprland v: 0.51.1 with: waybar tools: hypridle avail: hyprlock vt: 1 dm: SDDM
    Distro: Garuda base: Arch Linux
Machine:
  Type: Laptop System: ASUSTeK product: Vivobook_ASUSLaptop M7600QE_M7600QE v: 1.0
    serial: <superuser required>
  Mobo: ASUSTeK model: M7600QE v: 1.0 serial: <superuser required> uuid: <superuser required>
    UEFI: American Megatrends LLC. v: M7600QE.312 date: 05/29/2023
Battery:
  ID-1: BAT0 charge: 25.7 Wh (38.6%) condition: 66.7/96 Wh (69.5%) power: 26.6 W volts: 11.66
    min: 11.66 model: ASUSTeK ASUS Battery type: Li-ion serial: N/A charging: status: discharging
    control: start: N/A end: 70% cycles: 200
CPU:
  Info: model: AMD Ryzen 9 5900HX with Radeon Graphics bits: 64 type: MT MCP arch: Zen 3 gen: 3
    level: v3 note: check built: 2021-22 process: TSMC n7 (7nm) family: 0x19 (25) model-id: 0x50 (80)
    stepping: 0 microcode: 0xA500012
  Topology: cpus: 1x dies: 1 clusters: 1 cores: 8 threads: 16 tpc: 2 smt: enabled cache:
    L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 16 MiB desc: 1x16 MiB
  Speed (MHz): avg: 1100 min/max: 423/4683 boost: enabled scaling: driver: amd-pstate-epp
    governor: powersave cores: 1: 1100 2: 1100 3: 1100 4: 1100 5: 1100 6: 1100 7: 1100 8: 1100
    9: 1100 10: 1100 11: 1100 12: 1100 13: 1100 14: 1100 15: 1100 16: 1100 bogomips: 105397
  Flags-basic: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities: <filter>
Graphics:
  Device-1: NVIDIA GA107M [GeForce RTX 3050 Ti Mobile] vendor: ASUSTeK driver: nvidia v: 580.95.05
    alternate: nouveau,nvidia_drm non-free: 550-580.xx+ status: current (as of 2025-08;
    EOL~2026-12-xx) arch: Ampere code: GAxxx process: TSMC n7 (7nm) built: 2020-2023 pcie: gen: 1
    speed: 2.5 GT/s lanes: 8 link-max: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 01:00.0
    chip-ID: 10de:25a0 class-ID: 0302
  Device-2: Advanced Micro Devices [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Mobile Series]
    vendor: ASUSTeK driver: amdgpu v: kernel arch: GCN-5 code: Vega process: GF 14nm built: 2017-20
    pcie: gen: 3 speed: 8 GT/s lanes: 16 ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 04:00.0
    chip-ID: 1002:1638 class-ID: 0300 temp: 52.0 C
  Device-3: IMC Networks USB2.0 HD UVC WebCam driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s
    lanes: 1 mode: 2.0 bus-ID: 3-3:4 chip-ID: 13d3:5458 class-ID: fe01 serial: <filter>
  Display: wayland server: X.org v: 1.21.1.20 with: Xwayland v: 24.1.9 compositor: Hyprland
    v: 0.51.1 driver: X: loaded: amdgpu,nvidia unloaded: modesetting,nouveau alternate: fbdev,nv,vesa
    dri: radeonsi gpu: amdgpu display-ID: 1
  Monitor-1: eDP-1 model: Samsung 0x415d built: 2021 res: mode: 3840x2400 hz: 60
    scale: 240% (2.4) to: 1601x1000 dpi: 284 gamma: 1.2 size: 344x215mm (13.54x8.46")
    diag: 406mm (16") ratio: 16:10 modes: max: 3840x2400 min: 640x480
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
  Info: Tools: gpu: nvidia-smi wl: kanshi, wdisplays, wlr-randr x11: xprop
Audio:
  Device-1: Advanced Micro Devices [AMD/ATI] Renoir/Cezanne HDMI/DP Audio driver: snd_hda_intel
    v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 04:00.1 chip-ID: 1002:1637 class-ID: 0403
  Device-2: Advanced Micro Devices [AMD] Audio Coprocessor vendor: ASUSTeK driver: N/A
    alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x, snd_acp_pci,
    snd_rpl_pci_acp6x, snd_pci_ps, snd_sof_amd_renoir, snd_sof_amd_rembrandt, snd_sof_amd_vangogh,
    snd_sof_amd_acp63, snd_sof_amd_acp70 pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 04:00.5
    chip-ID: 1022:15e2 class-ID: 0480
  Device-3: Advanced Micro Devices [AMD] Family 17h/19h/1ah HD Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 04:00.6
    chip-ID: 1022:15e3 class-ID: 0403
  API: ALSA v: k6.17.6-zen1-1-zen status: kernel-api tools: alsactl,alsamixer,amixer
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.4.9 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: MEDIATEK MT7921 802.11ax PCI Express Wireless Network Adapter vendor: AzureWave
    driver: mt7921e v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 14c3:7961
    class-ID: 0280
  IF: wlp2s0 state: up mac: <filter>
  IF-ID-1: dae0 state: up speed: 10000 Mbps duplex: full mac: <filter>
  Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
Bluetooth:
  Device-1: IMC Networks Wireless_Device driver: btusb v: 0.8 type: USB rev: 2.1 speed: 480 Mb/s
    lanes: 1 mode: 2.0 bus-ID: 3-2:3 chip-ID: 13d3:3563 class-ID: e001 serial: <filter>
  Report: btmgmt ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 5.3 lmp-v: 12 status:
    discoverable: no pairing: no class-ID: 6c010c
Drives:
  Local Storage: total: 476.94 GiB used: 91.37 GiB (19.2%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix model: HFM512GD3JX013N size: 476.94 GiB
    block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
    fw-rev: 41000C20 temp: 34.9 C scheme: GPT
Partition:
  ID-1: / raw-size: 90 GiB size: 90 GiB (100.00%) used: 12.94 GiB (14.4%) fs: btrfs
    dev: /dev/nvme0n1p5 maj-min: 259:5
  ID-2: /boot/efi raw-size: 100 MiB size: 99.2 MiB (99.21%) used: 31.2 MiB (31.5%) fs: vfat
    dev: /dev/nvme0n1p1 maj-min: 259:1
  ID-3: /home raw-size: 90 GiB size: 90 GiB (100.00%) used: 12.94 GiB (14.4%) fs: btrfs
    dev: /dev/nvme0n1p5 maj-min: 259:5
  ID-4: /var/log raw-size: 90 GiB size: 90 GiB (100.00%) used: 12.94 GiB (14.4%) fs: btrfs
    dev: /dev/nvme0n1p5 maj-min: 259:5
  ID-5: /var/tmp raw-size: 90 GiB size: 90 GiB (100.00%) used: 12.94 GiB (14.4%) fs: btrfs
    dev: /dev/nvme0n1p5 maj-min: 259:5
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 15.02 GiB used: 0 KiB (0.0%) priority: 100 comp: zstd
    avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 53.6 C mobo: 42.0 C gpu: amdgpu temp: 52.0 C
  Fan Speeds (rpm): cpu: 3400
Info:
  Memory: total: 16 GiB note: est. available: 15.02 GiB used: 6.55 GiB (43.6%)
  Processes: 407 Power: uptime: 6h 39m states: freeze,mem,disk suspend: s2idle wakeups: 1
    hibernate: platform avail: shutdown, reboot, suspend, test_resume image: 5.94 GiB
    services: upowerd Init: systemd v: 258 default: graphical tool: systemctl
  Packages: pm: pacman pkgs: 1266 libs: 357 tools: pacseek,paru Compilers: gcc: 15.2.1
    Client: Unknown Client: electron inxi: 3.3.39
Garuda (2.11.1-1):
  System install date:     2025-10-31
  Garuda release:          251002
  Last full system update: 2025-11-02 ↻
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut nvidia-utils nvidia-open-dkms garuda-hardware-profile-nvidia garuda-hardware-profile-standard garuda-hardware-profile-standard-x11
  Windows dual boot:       Probably (Run as root to verify)
  Failed units:            
--- System Health Check Report ---
24/25 checks run in 1.33 seconds ⌛
Powered by garuda-health 🦅

--- INFO ---
 - A reboot is pending (update applied since last reboot)

✅ System health check passed. No issues found.

I’m somehow assuming there’s something like this happening, maybe a new file with a space in the file name:

@FGD seems it was indeed related to the update. I guess wiping a file with space in it will fix (and I just remembered this happened in the past too).

Now that’s some funny icon names (shown as whitespace):

[master f67a0b4] fix: remove icons containing whitespace-like characters in the name
 Date: Sun Nov 2 15:04:24 2025 +0100
 3 files changed, 1 insertion(+), 2 deletions(-)
 delete mode 120000 "places/16/folder-text\342\200\257-symbolic.svg"
 delete mode 100644 "places/16/folder-text\342\200\257.svg"

Edit: I believe this should be gone now. Please report back.

4 Likes

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.