Adding a testing repo gives error

System:
  Kernel: 6.5.3-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=db5ad2d3-011a-415d-b500-980cffc68a0c rw rootflags=subvol=@
    quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0
    resume=UUID=4d1e366d-81b5-4f61-89b6-9f79c56f1412 loglevel=3 ibt=off
  Desktop: GNOME v: 44.5 tk: GTK v: 3.24.38 wm: gnome-shell dm: 1: GDM
    v: 44.1 2: SDDM note: stopped Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Laptop System: ASUSTeK product: ZenBook UX325EA_UX325EA v: 1.0
    serial: <superuser required>
  Mobo: ASUSTeK model: UX325EA v: 1.0 serial: <superuser required>
    UEFI: American Megatrends LLC. v: UX325EA.317 date: 08/09/2022
Battery:
  ID-1: BAT0 charge: 51.1 Wh (88.1%) condition: 58.0/67.1 Wh (86.5%)
    volts: 15.9 min: 15.9 model: ASUSTeK UX325 type: Li-ion serial: <filter>
    status: discharging cycles: 153
CPU:
  Info: model: 11th Gen Intel Core i5-1135G7 bits: 64 type: MT MCP
    arch: Tiger Lake gen: core 11 level: v4 note: check built: 2020
    process: Intel 10nm family: 6 model-id: 0x8C (140) stepping: 1
    microcode: 0xAC
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 320 KiB desc: d-4x48 KiB; i-4x32 KiB L2: 5 MiB desc: 4x1.2 MiB L3: 8 MiB
    desc: 1x8 MiB
  Speed (MHz): avg: 2410 high: 3780 min/max: 400/4200 scaling:
    driver: intel_pstate governor: powersave cores: 1: 2402 2: 3324 3: 3780
    4: 3627 5: 400 6: 2607 7: 1055 8: 2086 bogomips: 38707
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics] vendor: ASUSTeK
    driver: i915 v: kernel arch: Gen-12.1 process: Intel 10nm built: 2020-21
    ports: active: eDP-1 empty: DP-1, DP-2, DP-3, DP-4, HDMI-A-1, HDMI-A-2,
    HDMI-A-3, HDMI-A-4, HDMI-A-5 bus-ID: 0000:00:02.0 chip-ID: 8086:9a49
    class-ID: 0300
  Device-2: Quanta USB2.0 HD UVC WebCam driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-6:3 chip-ID: 0408:30c0
    class-ID: fe01 serial: <filter>
  Display: wayland server: X.org v: 1.21.1.8 with: Xwayland v: 23.2.0
    compositor: gnome-shell driver: X: loaded: modesetting
    alternate: fbdev,intel,vesa dri: iris gpu: i915 display-ID: 0
  Monitor-1: eDP-1 model: Samsung 0x4158 built: 2020 res: 1920x1080 dpi: 166
    gamma: 1.2 size: 294x165mm (11.57x6.5") diag: 337mm (13.3") ratio: 16:9
    modes: 1920x1080
  API: EGL/GBM Message: No known Wayland EGL/GBM data sources.
Audio:
  Device-1: Intel Tiger Lake-LP Smart Sound Audio vendor: ASUSTeK
    driver: sof-audio-pci-intel-tgl
    alternate: snd_hda_intel,snd_sof_pci_intel_tgl bus-ID: 0000:00:1f.3
    chip-ID: 8086:a0c8 class-ID: 0401
  API: ALSA v: k6.5.3-zen1-1-zen status: kernel-api tools: N/A
  Server-1: PipeWire v: 0.3.80 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Wi-Fi 6 AX201 driver: iwlwifi v: kernel bus-ID: 0000:00:14.3
    chip-ID: 8086:a0f0 class-ID: 0280
  IF: wlo1 state: up mac: <filter>
Bluetooth:
  Device-1: Intel AX201 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-10:4 chip-ID: 8087:0026
    class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.2
    lmp-v: 11 status: discoverable: no pairing: no class-ID: 6c010c
RAID:
  Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd
    v: 0.6 port: N/A bus-ID: 0000:00:0e.0 chip-ID: 8086:9a0b rev: class-ID: 0104
Drives:
  Local Storage: total: 476.94 GiB used: 21.73 GiB (4.6%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix model: HFM512GD3JX013N
    size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 41000C20 temp: 37.9 C
    scheme: GPT
Partition:
  ID-1: / raw-size: 115 GiB size: 115 GiB (100.00%) used: 21.73 GiB (18.9%)
    fs: btrfs dev: /dev/nvme0n1p8 maj-min: 259:7
  ID-2: /boot/efi raw-size: 1024 MiB size: 1022 MiB (99.80%)
    used: 580 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p6 maj-min: 259:6
  ID-3: /home raw-size: 115 GiB size: 115 GiB (100.00%)
    used: 21.73 GiB (18.9%) fs: btrfs dev: /dev/nvme0n1p8 maj-min: 259:7
  ID-4: /var/log raw-size: 115 GiB size: 115 GiB (100.00%)
    used: 21.73 GiB (18.9%) fs: btrfs dev: /dev/nvme0n1p8 maj-min: 259:7
  ID-5: /var/tmp raw-size: 115 GiB size: 115 GiB (100.00%)
    used: 21.73 GiB (18.9%) fs: btrfs dev: /dev/nvme0n1p8 maj-min: 259:7
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: partition size: 9.59 GiB used: 0 KiB (0.0%)
    priority: -2 dev: /dev/nvme0n1p9 maj-min: 259:8
  ID-2: swap-2 type: zram size: 15.32 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 8 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 42.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Processes: 267 Uptime: 40m wakeups: 3919 Memory: total: 16 GiB
  available: 15.32 GiB used: 3.03 GiB (19.8%) Init: systemd v: 254
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages: 1264
  pm: pacman pkgs: 1250 libs: 390 tools: pamac,paru pm: flatpak pkgs: 14
  Shell: fish v: 3.6.1 default: Bash v: 5.1.16 running-in: gnome-terminal
  inxi: 3.3.29
Garuda (2.6.16-1):
  System install date:     2023-09-16
  Last full system update: 2023-09-20
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       Probably (Run as root to verify)
  Failed units:            

Whenever i try to add a mirror it gives an error

 sudo pacman -U https://br-mirror.amanoteam.com/fcgu/fcgu-mirrorlist-4-3-any.pkg.tar.zs

:: Retrieving packages...
 fcgu-mirrorlist-4-3-any.pkg.tar.zs failed to download
error: failed retrieving file 'fcgu-mirrorlist-4-3-any.pkg.tar.zs' from br-mirror.amanoteam.com : The requested URL returned error: 404
warning: failed to retrieve some files

I followed this site https://www.osside.net/2023/08/09/gnome-45-on-arch-linux-alpha-beta/
why i getting this error?

The page you linked shows a different command than the one you are running.

  • Official page mirror doesn’t work at the moment and I had to use this:
# pacman -U https://mirror.inetol.net/$repo/fcgu/fcgu-mirrorlist-2-4-any.pkg.tar.zst
1 Like
sudo pacman -U https://mirror.inetol.net/$repo/fcgu/fcgu-mirrorlist-2-4-any.pkg.tar.zst


error: no targets specified (use -h for help)

nothing happend

sudo sudo pacman -U https://mirror.inetol.net/fcgu/fcgu-mirrorlist-2-4-any.pkg.tar.zst
:: Retrieving packages...
 fcgu-mirrorlist-2-4-any.pkg.tar.zst failed to download
error: failed retrieving file 'fcgu-mirrorlist-2-4-any.pkg.tar.zst' from mirror.inetol.net : The requested URL returned error: 404
warning: failed to retrieve some files

same error

There is a t missing at the end

sudo pacman -U https://br-mirror.amanoteam.com/fcgu/fcgu-mirrorlist-4-3-any.pkg.tar.zst

By-the-way, you know you’re seriously risking to break your system, don’t you? :slight_smile:

3 Likes

Is it really dangerous to use this repo?

Let’s say it is something we haven’t included in our system, since it hasn’t even been released by Arch. So, basically, it hasn’t been tested (at last enough for a release).
So, when you’ll have troubles clearly related to GNOME, our developers (or the helpers in general) might not be able to support you, since they don’t know what you have inside your machine and will not be able to replicate your issues…
You will be really at the bleeding edge and onw your own in case of troubles.
For sure this is something that might be nice to do on a testing system, but I’d never do it on my daily driver. Maybe on a different machine or a different partition/installation…

3 Likes

I added the keyrings how can I delete them?

They should not hurt (and that repo seems to be from a reliable person), anyway, I think you simply imported one key. From that site/guide I see:

  • Install and trust the signing-key first:

# pacman-key --keyserver hkps://keys.openpgp.org --recv-keys 6E58E886A8E07538A2485FAED6A4F386B4881229 # pacman-key --lsign-key 6E58E886A8E07538A2485FAED6A4F386B4881229

So, to remove it, this should be enough:

sudo pacman-key -d 6E58E886A8E07538A2485FAED6A4F386B4881229
3 Likes

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.